The weight of a Massey Ferguson 285 tractor is approximately 5,500-6,000 pounds.
To find the number of feet of cable on the reel, first subtract the weight of the empty reel from the total weight to get the weight of the cable only: 1279 pounds - 285 pounds = 994 pounds. Then divide the weight of the cable by the weight per foot to find the number of feet: 994 pounds / 7.1 pounds/foot ≈ 140 feet. So, there are approximately 140 feet of cable on the reel.
A kilogram is a measure of mass, not of weight. A person whose mass is 285 pounds will weigh 1267 Newtons.
Julius Peppers weighed around 287 pounds during his NFL career.
There are 285,000 grams in 285 kilograms.
The ideal efficiency of a Carnot engine can be calculated using the formula: Efficiency = 1 - (T_cold / T_hot), where T_cold is the temperature of the cold reservoir (in this case, 285 K) and T_hot is the temperature of the hot reservoir (2900 K). Plugging in the values, the ideal efficiency would be 1 - (285/2900) = 0.902 or 90.2%.
Since the 1977 model serial numbers start at: 9A254045, and the 1978 model numbers start at: 9A276935, my best guess would be that your MF-285 is a 1977 model. Source page: http://www.tractordata.com/farm-tractors/000/7/7/775-massey-ferguson-285.html
A good hydraulic fluid for a 285 Massey Ferguson is typically an oil meeting the specifications of ISO 46 or a universal tractor transmission fluid (UTTF) that complies with Massey Ferguson's requirements. Look for fluids that offer good anti-wear properties and thermal stability to ensure optimal performance. It's also important to check the owner's manual for any specific recommendations regarding hydraulic fluid types and viscosity.
he weighs 285
A Perkins 4 cylinder diesel engine comes standard with a Massey Ferguson 285 tractor. Other engine specifications include: 2000 RPMs, 17:5:1 Compression, 4.5 in x 5 in Bore/Stroke and 5.2 L displacement. The engine has a Measurement of 12.5"W x 16"H. You can read about this at http://www.alibaba.com/product-free/104938109/Massey_Ferguson_MF_285_tractor_gear.html
The Massey Ferguson 285 typically uses a multi-grade hydraulic oil, specifically a UTF (Universal Tractor Fluid) that meets the specifications of MF-1139. It's important to choose a hydraulic oil that provides good lubrication and protection for both the hydraulic system and the transmission. Always refer to the owner's manual for specific recommendations regarding oil viscosity and specifications.
To remove the hydraulic pump from a Massey Ferguson 285 tractor, first ensure the tractor is turned off and properly secured. Drain the hydraulic fluid to avoid spills and disconnect the hydraulic lines from the pump. Then, remove any mounting bolts securing the pump to the tractor and gently pull the pump away from its housing. Be sure to consult the service manual for specific details and torque specifications related to your model.
285 grams = about 0.628317 pounds.
You can purchase a manual for your tractor online. The online store is located here: http://www.ssbtractor.com/tractor_manual_display.cgi?m=Massey%20Ferguson&o=MF%20285.
20 stone 5 pound is a measurement of weight already. But it is also 129 kilograms and 285 pounds.
To find the number of feet of cable on the reel, first subtract the weight of the empty reel from the total weight to get the weight of the cable only: 1279 pounds - 285 pounds = 994 pounds. Then divide the weight of the cable by the weight per foot to find the number of feet: 994 pounds / 7.1 pounds/foot ≈ 140 feet. So, there are approximately 140 feet of cable on the reel.
to the left of the gear lever is a cap with a 1 1/16 bolt head on it. remove that cap and fill there. To check the level the is a small dipstick under the lift on the frame.
628.31745