0.616 kg/m according to BS standard
The weight of 1 meter length of 10mm diameter Saria (steel reinforcement bar) can vary depending on the density of steel used and the specific composition of the Saria. On average, a 1 meter length of 10mm diameter steel bar would weigh approximately 0.6-0.8 kilograms. It's best to refer to the manufacturer's specifications for precise weight information.
The weight of one foot of a three-quarter inch diameter steel bar will be approximately 1.42 pounds.
It will vary depending on the style of stainless steel Bull Bar that you are choosing. If you are looking at a basic center piece Bull Bar it will weigh around 30-50 pounds. If, however, you are looking at a Bull Bar with a Brush Guard, it will weigh 100-110 pounds.
To calculate the force required to lift 200kg by 10mm using a lever arm of 0.50m, you can use the formula for a lever: Force x Lever arm = Weight x Distance. Rearranging the formula: Force = (Weight x Distance) / Lever arm. Substituting the values, the force required would be (200kg x 10mm) / 0.50m = 4000 N.
A bar of steel sinks in water because its density is higher than that of water, causing it to displace less water than its own weight. A boat floats because its shape and design displace enough water to create an upward force called buoyancy that is greater than its weight.
The weight of 1 meter length of 10mm diameter Saria (steel reinforcement bar) can vary depending on the density of steel used and the specific composition of the Saria. On average, a 1 meter length of 10mm diameter steel bar would weigh approximately 0.6-0.8 kilograms. It's best to refer to the manufacturer's specifications for precise weight information.
0.39 kg/metre
Weight per metre length= 0.559 kg
Unit weight of 22mm dia reinforcement steel bar is 3 kg per metre length - Answer by m. Velsamy mobile 09884585625
L/162*d2
Calculate cross sectional area of 10mm bar amd 8mm bar, then divide them and you will get the no. of bars. For Eg. - Area of 10mm bar = 78.53 sq.mm Area of 8mm bar = 50.26 sq.mm No. of 8mm bars in replacement for 10mm bar = 1.562 bars [ theoritical] In practical u'll provide 2-8mm bars.
unit wt of reinforcement bar can be obtained in kg/ meter by d*d/162.162 where d is the dia of bar The formula is based on the density of rebar 490 lb/cft
Weight is 1.579 kg/m
0.618
.888kg/m
give me formula for weight in kg 8mm 10mm 12mm 16mm
mass=density/volume