what length would that be, and ordinary or high tensile
The weight of 12mm blue metal would depend on the density of the material. Blue metal is typically a type of crushed stone or aggregate used in construction, so its weight can vary. You would need to know the specific density of the blue metal material to calculate its weight accurately.
The weight of a 12mm diameter mild steel (MS) rod per meter length can be calculated using the formula: Weight = (Diameter^2) x 0.00617 where Diameter is in mm. Therefore, for a 12mm diameter MS rod, the weight per meter length would be approximately 0.888 kg.
The weight of 12mm glass per square meter is approximately 28.8 kg/m². This may vary slightly depending on the specific type of glass and its composition.
To calculate the weight of an iron bar, you need to know its length. Assuming a standard density of iron, the weight of a 12mm iron bar to be one metric ton would require a length of approximately 82.5 meters. This calculation is based on the volume of the iron bar and its density.
A blueberry is typically around 12mm in size.
Go to the Weighing Machine and calculate it...................Stupiddd
A standard HSS drill bit in 12mm is all that's needed.
A diamond that measures 12mm by 10mm in an oval cut can weigh in the neighborhood of five carats.
The weight of a 1 meter piece of 12mm angle iron can be calculated using the density of steel, which is approximately 7850 kg/m³. A 12mm angle iron typically has dimensions of 12mm x 12mm with a certain thickness, so its volume can be calculated based on its geometry. For a rough estimate, a 1 meter length of 12mm angle iron weighs about 3.5 to 4 kg. However, the exact weight can vary slightly based on the specific design and thickness of the angle iron.
give me formula for weight in kg 8mm 10mm 12mm 16mm
Remove skid plate 12mm bolt
13mm diameter & 3100 length pl. give me weight
You need to know the thickness of the chequered plate to calculate weight. As a thumbrule, for 12mm thick chequered plate, you can consider 10 kg per sq.ft. Multiply by area to get the total weight. +++ You cannot mix units like that. You give the dimensions in mm and kg then introduce feet - it should be all Imperial or all metric.
5.33 is the weight of 12mm dia. bars.
Neither mass nor weight can be converted to length.
The weight of 12mm blue metal would depend on the density of the material. Blue metal is typically a type of crushed stone or aggregate used in construction, so its weight can vary. You would need to know the specific density of the blue metal material to calculate its weight accurately.
4mm chequered plate unit weight