0
What else can I help you with?
How do you calculate theoretical frequency?
Theoretical frequency can be calculated by multiplying the total number of observations by the probability of the event occurring. This calculation assumes that each event has an equal chance of occurring. Mathematically, it can be represented as: Theoretical frequency = Total number of observations * Probability of event occurring.
Is there a maximum theoretical frequency for electromagnetic waves?
Yes, there is maximum theoretical frequency for EM (electromagnetic) waves. In the EM Spectrum, the highest frequency band is of gamma rays, which consist of frequencies greater than 1x10**19 Hz and wavelenth less than 0.1 A0.The three equations (shown below) explain all manner about EM waves:Where:c = 299,792,458 m/s = the speed of light in vacuum,h = 6.62606896 (33) * 10**-34 = Planck's constant,J s = 4.13566733 (10) * 10**-15,eV s = ?This holds good for the (above) equations until this criteria breaks down, then theoretical conditions become indeterminate (collapse).The lower EM boundary is Extremely Long Waves and these consist of frequency below 106 Hz, and wavelenth exceeding 1000 A0 (the criteria for Maximum EM Waves) .
What was Einstein's profession?
Theoretical physicist
Is the natural frequency the same as the resonant frequency?
No, the natural frequency and resonant frequency are not the same. The natural frequency is the frequency at which an object vibrates when disturbed, while the resonant frequency is the frequency at which an object vibrates most strongly when subjected to external forces.
What are three frequency components of an am wave?
The three frequency components of an amplitude modulation (AM) wave are the carrier frequency, the upper sideband frequency (carrier frequency + modulating frequency), and the lower sideband frequency (carrier frequency - modulating frequency). These components are responsible for carrying the signal information in an AM wave.
How do you calculate theoretical frequency?
Theoretical frequency can be calculated by multiplying the total number of observations by the probability of the event occurring. This calculation assumes that each event has an equal chance of occurring. Mathematically, it can be represented as: Theoretical frequency = Total number of observations * Probability of event occurring.
What is the relationship between relative frequency and theoretical probability?
5746
How to get expected frequency value in chi square test?
For goodness of fit test using Chisquare test, Expected frequency = Total number of observations * theoretical probability specified or Expected frequency = Total number of observations / Number of categories if theoretical frequencies are not given. For contingency tables (test for independence) Expected frequency = (Row total * Column total) / Grand total for each cell
Why there is discrepancy between the observed and theoretical frequency in RC oscillator?
The discrepancy between the observed and theoretical frequency in a RC oscillator can arise from several factors, including component tolerances, parasitic capacitances and inductances, and non-ideal behavior of the active components. Additionally, temperature variations can affect resistor and capacitor values, further altering the frequency. The assumptions made in the theoretical model may not fully account for these real-world influences, leading to deviations between the predicted and measured frequencies.
What is the frequency for heads in a series of 100 tosses of a fair coin?
The theoretical frequency of heads will be .5 and as you do more and more coin tosses the observed frequency should get closer and closer to .5. With 100 tosses, it will be pretty close, but not exactly .5
What is law of large numbers?
when a probability experiment is repeated a large number of times, the relative frequency probability of an outcome will approach its theoretical probability.
Is there a maximum theoretical frequency for electromagnetic waves?
Yes, there is maximum theoretical frequency for EM (electromagnetic) waves. In the EM Spectrum, the highest frequency band is of gamma rays, which consist of frequencies greater than 1x10**19 Hz and wavelenth less than 0.1 A0.The three equations (shown below) explain all manner about EM waves:Where:c = 299,792,458 m/s = the speed of light in vacuum,h = 6.62606896 (33) * 10**-34 = Planck's constant,J s = 4.13566733 (10) * 10**-15,eV s = ?This holds good for the (above) equations until this criteria breaks down, then theoretical conditions become indeterminate (collapse).The lower EM boundary is Extremely Long Waves and these consist of frequency below 106 Hz, and wavelenth exceeding 1000 A0 (the criteria for Maximum EM Waves) .
Who invented frequency distribution?
Nobody invented frequency distribution. Events happen, as is the nature of events. Some events can have different outcomes and a frequency distribution is simply the proportion of times that these different outcomes happen (empirical freq distrib) or are expected to happen based on scientific laws (theoretical freq distrib).
What is the definitions of a theoretical probability?
To me, the theoretical probability is what is termed the classical probability. This says the probability is the number of ways an event can occur divided by the number of possible events. Forexample, flip a coin. The theoretical probability for heads is 1/2. However, flip a coin 10 times and you will probably not get 5/10 (or 1/2). Doing the actual experiment to determine the probability is called relative frequency approximation.
What are the highest frequency and the lowest frequency of the em specturm?
There are no limits to the E&M spectrum.At the upper end, gamma rays extend to frequencies so high that their wavelengths areshorter than an atomic nucleus. Higher-energy sources in the universe produce gammarays with higher frequency, and there's no theoretical limit.At the lower end, the power grid radiates plenty of electromagnetic energy at 60 Hz, andit's relatively easy to build an oscillator on your work bench, if you want to, with a frequencyof 1 cycle per month or lower. Again, there's no theoretical limit.
How do use the word theoretical in a sentence?
his idea was just theoretical . Newton did not sound very theoretical .
If an analog signal with bandwidth of 1.7khz is to be digitized what time intervals should the analogy signals be sampled?
The theoretical minimum sampling rate required in order to avoid frequency aliasing is 3.4 KHz.
