answersLogoWhite

0

The word you are looking for is "engrave." It refers to the process of cutting or carving a design onto a hard surface, typically metal, by using a sharp tool.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Physics

A piece of metal was gently lowered into a measuring cylinder containing water.The level of water was at 20 cubic metre mark, what is the volume of metal?

The volume of the metal can be calculated by measuring the volume of water displaced after the metal was placed in the cylinder. If the water level rose to the 25 cubic meter mark after the metal was added, then the volume of the metal is 5 cubic meters.


What does 10k psco mean on a ring?

"10k" on a ring means that the ring is made of 10 karat gold. "psco" is likely the manufacturer's mark or the brand name of the jewelry manufacturer. It is common for jewelry to have markings indicating the metal purity and manufacturer.


Is metal stronger than styrofoam?

Yes, metal is generally stronger than styrofoam. Metal has higher strength and durability due to its molecular structure, making it more suitable for applications requiring rigidity and load-bearing capacity compared to the lightweight and less sturdy nature of styrofoam.


What does 14kPD mean on a ring?

It may be PB, not PD? part of the B may be worn away...if you have a loupe or magnifying glass you should look closely... a P or PB after the karat mark stands for Plumb...which means it is exactly 14K gold. 14K gold is softer than 10K and wears away easily, especially on rings. Or,... it could also be a makers mark.


How do you produce fabricated bends in trunking and traywork section material?

To produce fabricated bends in trunking and traywork section material, you can use a bending machine specifically designed for sheet metal fabrication. Make sure to follow the equipment's operating instructions and safety guidelines. Measure and mark the material accurately before bending to ensure precise angles and dimensions.

Related Questions

What word means to make a mark on metal?

etch, engraveetch, engraveetch, engraveetch, engrave


This ring has number 925 8 stamped with a lions head facing east what metal is it?

"925" is a mark of sterling silver. It means 92.5% of the metal is silver, and the rest is copper to make the silver more solid.


What is 750 mark on white metal jewelry?

750 means your gold is 18ct gold


Is LGB 10K real gold?

LGB means the item is plated. If there is also a 925 mark it means there is silver underneath the gold plate. A magnet will tell you if the metal underneath is a ferris metal or not.


Knock sensor location 1994 mark 8?

The knock sensor on a 1994 Lincoln Mark 8 is located on top of the engine, near the upper radiator hose. It constantly monitors for the distinctive knock made from incorrect ignition timing.


What is BO 18k?

BO on jewelry is the mark of the manufacturer. 18k means that there are 18 carats of whatever metal in that piece of jewelry.


What does make his mark mean?

It means that he becomes noticed in a field; his work is influential


What does RJ 6 mean stamped on a ring?

"RJ 6" stamped on a ring likely indicates the type of metal or metal composition used to make the ring. It could represent the purity of the metal or serve as a manufacturer's mark. For a specific identification, consulting a jeweler or researching the manufacturer may be helpful.


What route means Mark?

What root word means mark


What does 14 k TGP mean?

Well, darling, 14k TGP stands for 14 karat gold electroplated. It means there's a thin layer of 14 karat gold bonded to a base metal through an electroplating process. So, in simpler terms, it's like a cheap knock-off pretending to be the real deal.


What is metal of 1875 German Mark?

Silver


What tasks can a punch be used for in construction?

A punch can be used to mark small holes as a guide to drilling, it can knock out bolts from a tight hole and it can knock precut panels from electrical boxes.