0
The 30 Hz to 30 kHz frequency range is commonly used in audio applications. It covers the audible frequency spectrum for humans, making it suitable for music, speech, and sound reproduction in speakers and headphones. It is also used in various electronic devices such as microphones, amplifiers, and audio processors.
What else can I help you with?
What is the wavelength of a wave that has a frequency of 30Hz?
The wavelength of a wave with a frequency of 30Hz can be calculated using the formula: wavelength = speed of light / frequency. For example, in a vacuum, with the speed of light being approximately 3 x 10^8 m/s, the wavelength would be approximately 10,000,000 meters.
What is a modulated carrier waves?
A modulated carrier wave is the output of a modulator that includes the information of the signal that is applied to the carrier.When a signal typically a piece of music in the range of say 30Hz to 30KHz is applied to an AM modulator (not sure about FM or PM) with a carrier of say 3MHz the output consists of 4 packetsUpper Sideband (Carrier + Signal) 3.000003MHz to 3.03MhzLower Sideband (Carrier - Signal) .297MHz to .299997MHzCarrier 3MHzSignal 30Hz to 30KHzEither sideband in the case of Single Side Band (SSB) or Both (.297MHz to 3.03Mhz) in the case of Double Side Band (DSB) could be referred to as modulated carrier waves
What is the wavelength of a wood with 30kHz frequency?
The wavelength of a sound wave can be calculated using the formula: wavelength = speed of sound / frequency. The speed of sound in air is approximately 343 meters per second. Therefore, for a frequency of 30 kHz (30,000 Hz), the wavelength would be approximately 11.43 meters.
What is the frequency when 300 waves pass a point in one minute?
Frequency = (how many in one second) = (1/60) of (how many in one minute) = (300/60) = 5 Hz.
How do you find the frequency from wavelength?
To find the frequency from wavelength, you can use the formula: frequency speed of light / wavelength.
Is it possible to make an Electronic Pest Repellent using Arduino and make ultrasound from 30khz to 200khz frequency?
Yes it is possible to make an Electronic Pest Repellent using Arduino and possible to make ultrasound for 30khz to 200khz frequency; you must make a rectangle signal with a frequency and amplify it with transistors.
What is the wavelength of a wave that has a frequency of 30Hz?
The wavelength of a wave with a frequency of 30Hz can be calculated using the formula: wavelength = speed of light / frequency. For example, in a vacuum, with the speed of light being approximately 3 x 10^8 m/s, the wavelength would be approximately 10,000,000 meters.
What is the difference between a high frequency UPS and a Low frequency UPS?
The difference is in sine wave generation algorithm. In HI freq - it is 30kHz signal, modulated by 50Hz.
What is Smooth bass at -3dB at 30Hz mean?
"Smooth bass at -3dB at 30Hz" refers to the audio performance of a sound system where the bass response is measured at a frequency of 30Hz, indicating that the output at this frequency is 3 decibels lower than the system's maximum output. A smooth bass response implies that the sound is consistent and well-balanced without noticeable peaks or dips in the frequency range. This specification suggests that the system can reproduce deep bass sounds effectively while still maintaining clarity and fidelity at lower frequencies.
What does 30Hz sound like?
A sound at 30Hz is a very low frequency, often felt more than heard, producing a deep rumbling or bass effect. It's typically below the threshold of human hearing, but can create vibrations that are felt in the body. Sounds at this frequency can be associated with certain musical instruments, like bass guitars or synthesizers, and can evoke a sense of power or intensity. In practical applications, 30Hz is often used in subwoofer settings for music and sound effects.
How is it possible to represent a complex exponential signal with a frequency of 20Hz using a sampling frequency of 30Hz?
A 20Hz signal must be sampled at a minimum of 40Hz to have a chance of sampling both peaks and to get a reasonable representation it must be sampled at a minimum of 100Hz.For a sampling rate of 30Hz the Nyquist frequency is 15Hz and since 20Hz is above that it will generate the alias signal of 10Hz in the sampled data instead of the original signal of 20Hz. Therefore it is not possible to do what you ask.
What is a frequency band commonly used to communicate with submerged submarines?
The VLF (very low frequency) band, which is 3kHz to 30kHz, is able to penetrate water a couple of tens of meters. That makes this band best suited to communicate with a submerged submarine.
What is a modulated carrier waves?
A modulated carrier wave is the output of a modulator that includes the information of the signal that is applied to the carrier.When a signal typically a piece of music in the range of say 30Hz to 30KHz is applied to an AM modulator (not sure about FM or PM) with a carrier of say 3MHz the output consists of 4 packetsUpper Sideband (Carrier + Signal) 3.000003MHz to 3.03MhzLower Sideband (Carrier - Signal) .297MHz to .299997MHzCarrier 3MHzSignal 30Hz to 30KHzEither sideband in the case of Single Side Band (SSB) or Both (.297MHz to 3.03Mhz) in the case of Double Side Band (DSB) could be referred to as modulated carrier waves
What is the frequency range of hearing for a tiger?
30KHz to 50KHz is the frequency range of hearing for a tiger.
What is the wavelength of a wood with 30kHz frequency?
The wavelength of a sound wave can be calculated using the formula: wavelength = speed of sound / frequency. The speed of sound in air is approximately 343 meters per second. Therefore, for a frequency of 30 kHz (30,000 Hz), the wavelength would be approximately 11.43 meters.
What is a carrier wave?
A modulated carrier wave is the output of a modulator that includes the information of the signal that is applied to the carrier.When a signal typically a piece of music in the range of say 30Hz to 30KHz is applied to an AM modulator (not sure about FM or PM) with a carrier of say 3MHz the output consists of 4 packetsUpper Sideband (Carrier + Signal) 3.000003MHz to 3.03MhzLower Sideband (Carrier - Signal) .297MHz to .299997MHzCarrier 3MHzSignal 30Hz to 30KHzEither sideband in the case of Single Side Band (SSB) or Both (.297MHz to 3.03Mhz) in the case of Double Side Band (DSB) could be referred to as modulated carrier waves
What is utrasonic intruder alarm?
A signal usually 30khz to 40khz is send out and a receiver will detect this frequency. An intruder by merely disrupting this signal [phase shift as in Doppler effect] and cause the receiver to detect a phase shift and sound an alarm of sort.
