0
What else can I help you with?
What power must be in place when you first find an image in the microscope?
You should first use the lowest power setting of a microscope to find an object and then center it within the viewing area. Then, when you switch to the next higher magnification, your target should still be close to the center and easier to find and focus on.
What power must be in first place a slide on a microscope stage?
The lowest power objective lens should be in place when placing a slide on a microscope stage. This allows for easier focusing and initial viewing of the specimen at a lower magnification before switching to higher magnifications.
What objective must be in place when you remove a slide or place a new slide on the stage of your scope?
The objective must be in the upper position when removing or placing a new slide on the stage of your microscope. This prevents the potential for the lens to hit the slide and possibly damage both the lens and the slide.
What power must be in place when you first find an image on a microscope?
idk
Why do you think a microscope always must be stored with the low power objective in place over the stage?
Storing a microscope with the low power objective in place helps to protect the more delicate high power objectives from damage. The low power objective serves as a barrier, preventing the higher power objectives from being accidentally touched or bumped during storage, which can affect their alignment and performance.
What power must be in place when you first find an image in the microscope?
You should first use the lowest power setting of a microscope to find an object and then center it within the viewing area. Then, when you switch to the next higher magnification, your target should still be close to the center and easier to find and focus on.
What power must be in first place a slide on a microscope stage?
The lowest power objective lens should be in place when placing a slide on a microscope stage. This allows for easier focusing and initial viewing of the specimen at a lower magnification before switching to higher magnifications.
What objective must be in place when you remove a slide or place a new slide on the stage of your scope?
The objective must be in the upper position when removing or placing a new slide on the stage of your microscope. This prevents the potential for the lens to hit the slide and possibly damage both the lens and the slide.
Why do you use on or slide to be examined with the oil immersion objective?
If you are using the oil immersion objective on a microscope, you must use oil to increase the resolution of the lens. These lens are used at very high magnification.
What power must be in place when you first find an image on a microscope?
idk
Why do you think a microscope always must be stored with the low power objective in place over the stage?
Storing a microscope with the low power objective in place helps to protect the more delicate high power objectives from damage. The low power objective serves as a barrier, preventing the higher power objectives from being accidentally touched or bumped during storage, which can affect their alignment and performance.
Why the objective lens of a refracting telescope is much larger than the objective lens of a compound microscope?
The objective lens of a refracting telescope needs to gather as much light as possible to see faint objects in the night sky, so a larger lens helps achieve this. In contrast, the objective lens of a compound microscope is designed to magnify specimens that are already well-lit, so a smaller lens can be used effectively.
Why must you turn the nosepiece to the lpo before putting away?
Turning the nosepiece to the lowest power objective (LPO) before putting the microscope away reduces the risk of damaging the objectives and slides. This position also helps to protect the lenses and prevents any debris from accumulating on them during storage.
How do you write microscope in a sentence?
I must have left my microscope in the car.
Why must you always return to the low power objective before you put the microscope away?
The higher power objectives are longer and can result in scratching the lens the next time someone uses the microscope. It also encourages the user to remove any slides that may have been left which they otherwise would have missed.
What is the objective lens used to locate the specimen and the first focus?
When viewing a specimen, you must always use the lower power objective lenses first. Low power lens gives the widest field of view and makes it easier to find the specimen when you look through the microscope. Finding the specimen at high power, without first centering it in the field of view at low power, is nearly impossible.
Can the same calibration factor be used to determine the size of a microorganism under all objectives?
No, different objectives have different magnifications and optical properties, which can affect the calibration factor. It is important to calibrate the microscope for each objective to ensure accurate measurements of microorganism size.
