The Bernoulli's Principle explains why the flame bends towards the wind. As the wind blows over the flame, it lowers the air pressure above the flame, causing the higher pressure below the flame to push it in the direction of the wind.
The Bernoulli's principle explains why a flame bends towards the wind. As the wind blows over the flame, it creates a lower pressure area above the flame than below, causing the flame to bend in the direction of the wind to equalize the pressure difference.
When a bimetallic strip is exposed to the flame of a burner, the two metals in the strip expand at different rates due to their differing coefficients of thermal expansion. This causes the strip to bend as one side expands more than the other, demonstrating the principle behind the bimetallic strip's use in thermostats and temperature-regulating devices.
The gas hose needs to be flat to ensure a continuous and smooth flow of gas to the burner. A flat gas hose prevents kinks or bends that could interrupt the gas supply and cause fluctuations in the flame. This helps maintain a consistent and stable heat source for experiments or heating purposes.
Its not a Blue Flame (blue flame)its a white flame. i believe it can get around 1,000degrees
The Blue Flame Will Be Noisier. The Yellow Flame Is Called A Safety Flame Because Everyone can See it. There Are Two Blue Flames: Medium Roaring The Roaring Flame Has A Blue Cone In The Middle Of The Flame And It Is The Hottest. It Also Has More Oxygen. But Overall, The Blue Flames Will Be Noisier Than The Yellow Flame.
The Bernoulli's principle explains why a flame bends towards the wind. As the wind blows over the flame, it creates a lower pressure area above the flame than below, causing the flame to bend in the direction of the wind to equalize the pressure difference.
If your kerosene heater has a wicker which will carry the fuel additive (kerosene or oil) up towards the flame then you may put oil. However, if the heater works on hydrocaron compression-combustion priciple, then oil may not work as a fuel additive
A flame bends toward the wind because the flow of air carries the heat and combustion products away, creating an area of lower pressure on the windward side of the flame. This pressure difference causes the flame to lean in the direction of the wind.
When a bimetallic strip is exposed to the flame of a burner, the two metals in the strip expand at different rates due to their differing coefficients of thermal expansion. This causes the strip to bend as one side expands more than the other, demonstrating the principle behind the bimetallic strip's use in thermostats and temperature-regulating devices.
"oo-er...that..Disney.....ohhh" When you see people flame them, they are also partaking in the flame towards what Disney has become - cough cough -
No. The blue colour shown by a flame is an indication of the temperature but the blue colour of a star indicates it's direction of movement, in this case towards the observer.
Yes, a candle tends to burn the brightest towards the end as the heat and flame are concentrated due to the decreasing amount of wax remaining to be consumed. This concentration typically results in a more intense and brighter flame.
One example of a silvery metal that is easily bendable and melts quickly in a lighter flame is lead. Lead is a soft and malleable metal with a low melting point, making it suitable for use in applications like soldering.
This phrase typically implies a strong attraction or fascination towards something or someone, despite potential negative consequences. Like a moth to a flame, it suggests being drawn in despite the risk of harm or danger.
Grapple and then walk towards the flame. The wrestler may get chucked over the top rope or may survive.
The negative and positive signs on a butane lighter typically indicate the direction in which to turn the adjustment wheel to increase or decrease the flame size. The negative sign usually indicates turning the wheel counterclockwise to decrease the flame size, while the positive sign indicates turning it clockwise to increase the flame size. It is important to adjust the flame size carefully to ensure proper functioning and safety of the lighter.
lets take the candle as an example: the flame of the candle heats the surrounding air thus the cold air bushes the hot air up and takes its place because the cold air is much denser than the hot air, due to this motion the flame itself goes up with the hot air and so on.