The simple machine with a stiff bar that rests on a fulcrum is a lever. Levers are used to apply force to move objects by leveraging the applied force against the load.
wheel and axel. that's the answer for it on study island.
The simple machine you are referring to is a lever. A lever consists of a rigid arm (lever arm) that pivots around a fixed point called a fulcrum. Levers are used to amplify force or change the direction of a force.
A stiff bar that rests on a support is called a beam. Beams are structural elements that are designed to resist bending and carry loads. They are commonly used in buildings, bridges, and other structures to support weight and distribute forces.
The dead body was already stiff when I found it there.
one of them is stiff.
Pulley-a simple machine that uses grooved wheels and a rope to raise, lower, or move a load.Lever- a stiff bar that rests on a support called a fulcrum which lifts or moves loads.
fulcrum
The stiff rod to which you are referring is a LEVER. The pivot point is the Fulcrum.
wheel and axel. that's the answer for it on study island.
The simple machine you are referring to is a lever. A lever consists of a rigid arm (lever arm) that pivots around a fixed point called a fulcrum. Levers are used to amplify force or change the direction of a force.
A lever is a simple machine but it is made out of a stiff bar that moves freely around a fixed point.
A lever is a simple machine but it is made out of a stiff bar that moves freely around a fixed point.
i dont know i need the answer for science homework the answer is a stiff bar ,fulcrum,aloadand the force you apply . take it from a 10 year old :]:]:]:] happy face
A lever is a stiff structure that rotates around a fixed point. The fixed point around which a lever rotates is fulcrum.
A stiff rod that rotates around a pivot point is called a lever. It is a type of simple machine that is used to help move a heavy or firmly fixed load.
A stiff bar that rests on a support is called a beam. Beams are structural elements that are designed to resist bending and carry loads. They are commonly used in buildings, bridges, and other structures to support weight and distribute forces.
A lever is a simple machine, which can be part of more complex mechanical devices. The basic lever consists of a stiff bar or rod placed across a support structure called a fulcrum. Using the lever, an applied force can be multiplied. This can convert small forces over a long distance into a large force over a short distance (or vice versa).The lever takes advantage of the formula F = MD (force= mass x distance).Levers are of three basic types, depending on the location of the force and the fulcrum.The fulcrum is between the applied force and the load (output force). Example : seesaw, crowbarThe load is between the force and the fulcrum. Example : wheelbarrow (weight carried by wheel)The force is applied between the fulcrum and the load. Example : human elbow, when bendingA lever is a simple machine consisting of a beam or rigid rod pivoted at a fixed hinge, or fulcrum.Any object which when used has a pivot point (a point it turns about) sometimes called the fulcrum, so that you can apply a force at one point (called effort) and a force is then applied on another object (called resistance). Because of differing distances between the fulcrum and the effort compared to the distance between the fulcrum and the resistance, the effort may be increased, which is the usual effect desired, or speed may be increased.The claw of a hammer is an example. The pivot point it the point of contact with the wood. A nail driven into the wood cannot be pulled by your hand alone, but your hand supplied the effort on the handle of the hammer and the claw pulls on the nail, the resistance, and the effort becomes greater so that it pulls the nail.