answersLogoWhite

0

The Refrigerator evaporator coil has many forces working upon it from a wide swing of temperature and pressure and vibrations that is caused. Then there is the ice that builds up on the coil between defrost cycles that produces some of the forces that are on the coil. To that add electrolyses of the different metal that are uses in the coil and the corrosive chemical bath that comes from the area and products being refrigerated. The refrigerator evaporator coil have a lot of silver soldered 90 degree union fitting that the forces work on. Than there is the design of the standard refrigerator evaporator coil. The coil sets in the drain pan and drips condensate into the drain pan. A long with the condensate comes some of the dirt and lent that collects on the evaporator fins and if not maintained it will plug the fins and than plug the drain pan. And fill the coil with condensate then more ice. When you really look at the refrigeration evaporation coil you wonder why they don't leak more. I am not even going to talk about the guys that defrost refrigeration evaporator coils with a ice picks.

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Physics

How those evaporator works in a refrigerator system?

An evaporator in a refrigerator system works by absorbing heat from inside the refrigerator, causing the refrigerant inside the coils to evaporate into a gas. This process cools the interior of the refrigerator. The evaporator coils are where the evaporation of the refrigerant occurs, and the circulation of air inside the refrigerator helps to transfer the heat from the interior to the coils.


How are refrigerants used to remove heat in a refrigerator?

Refrigerants remove heat in a refrigerator by changing phases within the coils. They will absorb or release heat through evaporation or condensation. The compressor and expansion valve facilitate the pressure changes. For more information and a diagram, please refer to the related link.


What do the coils outside of a refrigerator do?

The coils outside of a refrigerator release heat from inside the refrigerator to the surrounding air, helping to keep the inside of the refrigerator cool. This process allows the refrigerator to maintain the desired temperature for storing food and other items.


Why causes a refrigerator to leak?

There are a few reasons why your refrigerator may be leaking:Blocked evaporator drain (for draining away defrosted ice)Leaking water filter headLeaking water tankDamaged or cracked water lines


What are two changes of state of the refrigerant necessary to operate the refrigerator?

The two changes of state of the refrigerant necessary to operate the refrigerator are vaporization (absorbs heat from the refrigerator to cool it down) and condensation (releases heat to the surrounding environment to maintain cooling). These processes occur in the evaporator and condenser coils within the refrigeration system.

Related Questions

How those evaporator works in a refrigerator system?

An evaporator in a refrigerator system works by absorbing heat from inside the refrigerator, causing the refrigerant inside the coils to evaporate into a gas. This process cools the interior of the refrigerator. The evaporator coils are where the evaporation of the refrigerant occurs, and the circulation of air inside the refrigerator helps to transfer the heat from the interior to the coils.


What are the components of refrigirator?

The main components of a refrigerator are a compressor, condenser coils, evaporator coils, and a refrigerant. The compressor circulates the refrigerant, which absorbs heat from inside the refrigerator and releases it outside through the condenser coils. The evaporator coils then cool the air inside the refrigerator.


How do you clean refrigerator evaporator coils?

Use a coil cleaning brush. You should clean your coils once per month with this brush to keep your refrigerator running efficiently. These can be purchased at www.appliancepartspros.com.


What is the function of the fridge valve in a refrigerator system?

The fridge valve in a refrigerator system controls the flow of refrigerant between the evaporator and condenser coils, helping to regulate the temperature inside the fridge.


How can a neighbor stop and start refrigeration in your refrigerator?

There are evaporator coils and circulating fan in the freezer zone of the refrigerator. Poor cooling can be a result of excessive frost development on the evaporating coils. Over time frost accumulates over the coils and fan. When frost gets accumulated over the evaporator coils, they get insulated.


Where are the refrigerator coils located in a typical refrigerator?

The refrigerator coils are typically located on the back or underneath the refrigerator.


What is the function of the freezer evaporator fan in a refrigerator and how does it contribute to the overall cooling process?

The freezer evaporator fan in a refrigerator helps circulate cold air throughout the freezer compartment. This fan plays a crucial role in maintaining a consistent temperature by distributing the cold air produced by the evaporator coils. By continuously moving the cold air, the fan ensures that the freezer stays at the desired temperature, contributing to the overall cooling process of the refrigerator.


What is causing my refrigerator to leak?

There are a few reasons why your refrigerator may be leaking:Blocked evaporator drain (for draining away defrosted ice)Leaking water filter headLeaking water tankDamaged or cracked water lines


How are Pancake Coils used in refrigeration?

Pancake Coils are often used as evaporator and condenser coils in refrigeration systems.


Where are the coils located on a Frigidaire refrigerator?

The coils on a Frigidaire refrigerator are typically located on the back or underneath the appliance.


Where are the condenser coils located on a refrigerator?

The condenser coils on a refrigerator are typically located on the back or underneath the appliance.


Fixing a leaking central air conditioner unit - Water is coming out of the unit in my drop-ceiling from the box that holds the condenser coils how do I fix this?

1st you would need to locate the leak. This is normally done by a trained tech by adding a leak detection dye into system then a UV light is used to find the leak. If the leak is in the copper line set then it can be repaired. If the leak is in the evaporator or condensing coils the coil would need to be replaced.