0
What else can I help you with?
Why is not good to tilt the microscope?
It is not good to tilt the microscope because if it is at the edge then say bye bye to your microscope. Because it will fall and you will have to pay ALOT of MONEY for it. Another reason is because it could fall on the table and crack the eye piece or any other glass parts of the microscope. Thanks for reading. REMEMBER SAFTEY FIRST! :)
How close to the edge of the 20.0kg table can a 66.0 kg person sit without tipping it over?
To prevent the table from tipping over, the torque created by the person's weight sitting on the edge must not overcome the torque due to the table's weight at the center. The torque due to the person sitting on the edge can be calculated as the person's weight multiplied by the distance from the edge. Setting this torque equal to the torque of the table gives you the maximum distance the person can sit from the edge without tipping the table.
What force will keep you from sliding off the edge of a rotating table?
Centrifugal force will push you outwards and keep you from sliding off the edge of a rotating table. This force acts in the opposite direction to the centripetal force, balancing your weight and preventing you from falling.
Which of these would you include in a free body diagram of a coin balanced on its edge on a table?
In a free body diagram of a coin balanced on its edge on a table, you would include the force of gravity acting downward on the coin, the normal force exerted by the table upward on the coin, and the force of friction between the coin and the table that prevents it from sliding.
How to find the fraction of the rope that can hang over the edge of the table before it begins to slip with the coefficient of static friction?
You are going to have to make a bunch of assumptions and simplifications. If you look at a real rope hanging over the edge of a real table you will see that , due to the fact that the rope has some stiffness, it does not make contact with the tabletop near the edge (or at least the contact pressure is less there) and the contact pressure at the edge can be rather high.I will not go through the calculations (I've forgotten a lot of my "Statics" unfortunately).
Why is it a good idea to place your microscope at least 10cm from the edge of the table?
Placing the microscope at least 10cm from the edge of the table helps prevent accidental knocks or bumps that could damage the microscope or the samples being observed. It also ensures a stable and secure base for the microscope, reducing the risk of it tipping over during use.
How far in should table legs be placed from the edge of a table?
Table legs should be placed approximately 1-2 inches from the edge of a table for stability and support.
Why should you Keep a microscope 10 cm from the edge of the table?
Keeping a microscope 10 cm from the edge of the table ensures stability and reduces the risk of it accidentally falling off or getting knocked over. This helps prevent damage to the microscope and ensures the safety of the user.
Why is it a good idea to place your microscope at least 10 cm from the edge of the table?
by placing your microscope at least 10 cm from the table,you greatly reduce the risk of it being knocked over.or if for some reason it still gets knocked over you can catch it before it turns into a real disaster.
What is the diameter of a 72 inch round table?
The diameter of a 72-inch round table is 72 inches, as the term "diameter" refers to the distance across the table through its center. This means that if you measure from one edge of the table to the opposite edge, it will be 72 inches.
How many inches should the dinner plate be placed from the edge of the table?
Dinner plates should typically be placed about 1 to 2 inches from the edge of the table. This distance helps ensure that diners have enough space to comfortably reach their plates without the risk of them sliding off the table. Additionally, it allows for proper spacing between place settings.
How close to the right edge of the 56 picnic table can a 69 man stand without the table tipping over?
Assuming the man stands at the edge of the table, he can stand up to 1/3 of the table's length from the right edge, which would be around 19 inches from the edge for a 56-inch table. However, the distribution of weight and stability of the table base can also affect this distance.
What size table topper for a 60 inch round table?
The answer depends on how much you want your "table topper" to hang over the edge of the table. If you want 6 inches of over-hang, then you would double 6 inches to have 12 inches of over-hang then add that to the diameter of your table: 12 + 60 = 72 inches of total "table topper".
Why should you keep your microscope at least 10 cm frim the edge of the table?
You should keep it 10 cm from the table so it doesn't do anything to the table like skid it or anything also so it doesn't break.
How many cubes that are 3 inches on each edge can be place in a box that is 9 inches long 6 inches wide and 27 inches tall?
54.
If a pool table measures 4ft by 8ft what is the length from the back edge of the top pocket to the bottom right pocket to the nearest tenth?
There are no pool tables that actually measure 4 foot by 8 foot. This appears to be a child's math question rather than a pool table question. The playable surface of an 8x4 pool table measures 88 inches by 44 inches. The back edge of the pocket is not a critical measurement on the table. There is no "top pocket". So, the distance from the farthest outside edge of the foot (the top) right pocket to the farthest outside edge of the bottom (the head) right pocket is 88 inches.
What is height of billiards game?
Under BCA and APA ules, a table surface must be between 29 1/4 inches and 30 1/4 inches from the floor. This is measured by placing a flat edge or yardstick across the corner. The height from floor to bottom edge of the straight edge is measured. Then the height from surface to straghtedge is measure and subtracted from the first measurement. This result is the height of the table.
