A bimetallic strip bends when heated because it is composed of two different types of metal. The different metals form the two sides of the strip expand and contract at different rates when subjected to a temperature change.
When heating a bimetallic strip, one side of the metals expands faster than the other, making it longer. Because it is bonded to the other metal, it cannot expand in a straight line. The only way the two metals can stay bonded while expanding at different rates, is for strip to bend, one side becoming longer than the other.
A Bimetallic Strip is made of two different metals joined together. The strips coils when it is heated and when the strip cools the strips uncoil again. And movements of the strips can operate a type of electrical switch.
a bimetallic strip is a strip made from two metals fastened together.
<><><>
It bends when heated, because one metal expands more than the other metal it is fastened to.
That's a "bi-metal" or "bi-metallic" strip.
It depends how it has been constructed
... smaller ...
Lower
Any temperature above or below the temperature at which they were glued together.
yes
The bimetallic strip bends.
A bimetallic strip is made from two combined metal strips that have different rates of expansion when heated. This causes the strip to bend and so close or open an electrical contact switch.
The two metals have different expansion rates when the strip is heated. This means that one of the metals will expand more than the other, causing the strip to bend.
That's a "bi-metal" or "bi-metallic" strip.
A bimetallic strip is made from two combined metal strips that have different rates of expansion when heated. This causes the strip to bend and so close or open an electrical contact switch.
A bimetallic strip is made from two combined metal strips that have different rates of expansion when heated. This causes the strip to bend and so close or open an electrical contact switch.
It depends how it has been constructed
actually what happen is that the strip is curved to the outside
... smaller ...
Lower
Appliances like electric iron, which need a cut off from the electric current from time to time as the appliance is heated adequately, use bimetallic strip for this.