There is nothing on the glass to reflect light.
To make glass into a mirror, a thin layer of metallic coating is applied to the back of the glass. This coating is typically made of materials like silver, aluminum, or chrome, which create the mirrored effect by reflecting light.
A mirror typically consists of a sheet of glass coated with a thin layer of metal, such as aluminum or silver, on one side. This metal coating reflects light to create a clear image. The back of the mirror is usually protected with a layer of paint or film to prevent damage to the metal coating.
The mist on the mirror has evaporated due to the heat from the shower or room temperature. As the water droplets in the mist lose energy, they evaporate into the air, leaving the mirror clear again.
To make a mirror, you would need a flat piece of glass or other suitable material, a reflective coating like silver or aluminum, and a protective layer to prevent the reflective coating from being damaged. The reflective coating is usually applied to one side of the glass to create the mirror surface.
To make a mirror, you typically need a sheet of glass, silver nitrate or aluminum powder, and a protective coating like paint or varnish. The glass provides a smooth surface for reflection, the silver nitrate or aluminum powder is what creates the reflective surface, and the protective coating helps prevent tarnishing. These materials are needed to create a clear and reflective surface for practical uses like viewing oneself or for decorative purposes.
To make a mirror with aluminum foil and glass, you will need to attach a sheet of aluminum foil to the back of the glass using a strong adhesive. Ensure the foil is smooth and free from wrinkles to create a reflective surface. It's important to note that this DIY mirror will not provide the same clarity and reflectivity as a traditional glass mirror.
Put meatal in the middle
To make glass into a mirror, a thin layer of metallic coating is applied to the back of the glass. This coating is typically made of materials like silver, aluminum, or chrome, which create the mirrored effect by reflecting light.
It evaporated.
You can use any kind of glass to make a mirror - clear or colored, soda-lime or borosilicate, float glass or blown glass. Most mirrors are made out of float glass (standard window glass) coated with a layer of silver. The silver is protected by a layer of paint. Some manufacturers add a layer of copper between the silver and the paint to protect the silver from tarnishing. White metals like silver and aluminum reflect all the colors of light. You can also make a mirror with other metals, such as gold, copper or lead sulfide. Some telescopes and dental mirror are made with a layer of aluminum "sputtered" onto the front of the glass. You can see yourself in a mirror because the light rays that bounce off your face (or any object) bounce back to your eye when they hit the layer of metal instead of passing through as they do with transparent glass.
A mirror typically consists of a sheet of glass coated with a thin layer of metal, such as aluminum or silver, on one side. This metal coating reflects light to create a clear image. The back of the mirror is usually protected with a layer of paint or film to prevent damage to the metal coating.
because the glass used to make a mirror is green but then covered in a layer of silver therefore when you look down a mirror tunnel it will get dimmer and greener revealing the green glass behind the paint.
To make a mirror it has to be reflective. Glass is prone to shattering into dangerous shards, so polished aluminum, metallized plastic or chromed steel would probably work better.
To create a DIY one-way mirror at home, you can apply a reflective window film to a piece of glass or acrylic. This film allows light to pass through from one side, while appearing as a mirror from the other side. Make sure to clean the glass or acrylic thoroughly before applying the film to ensure a clear reflection.
If you want to try it yourself, take a good quality piece of clean glass (preferably plate) and get a can of spray metallic paint - aluminum, or the like. Cover one side with even, light strokes, until it is completely opaque. Let it dry, turn it over, and you should have a fairly good mirror.
The mist on the mirror has evaporated due to the heat from the shower or room temperature. As the water droplets in the mist lose energy, they evaporate into the air, leaving the mirror clear again.
Mirrors are coated with gold or silver because they are highly reflective metals. This allows the mirror to reflect light efficiently, producing a clear image. Additionally, these metals are corrosion-resistant, extending the lifespan of the mirror.