0
What else can I help you with?
How much energy is used to boil a kettle once?
Boiling a kettle once typically uses around 2000 to 2500 watts of energy for a few minutes, depending on the size and efficiency of the kettle. This can roughly translate to 0.04 to 0.06 kilowatt-hours (kWh) of electricity consumed per boil.
What current is a kettle?
The current drawn by a kettle can vary based on the power rating of the kettle. Typically, a kettle in the range of 1500-2000 watts would draw around 12-16 amps of current when operating at full power.
How much does a 50 gallon water heater full of water weigh?
A gallon of water weighs about 8.34 pounds. So, a 50 gallon water heater full of water would weigh approximately 417 pounds.
Which has a greater density a lake full of water or a cup full of water?
Density is weight by unit of volume, its only dependent on the liquid, not how much of it there is. If you fill the cup from the lake both the water in the cup and the water in the lake will have the same density. But if the water in the cup is from the ocean, and the lake is a freshwater lake, then the water in the cup will have a higher density.
What is the full of holes but can still hold water?
A sponge.
Why does half a full kettle take less time to boil a full one?
That is not possible a full kettle has more water,therefore it will take longer to boil.
How much does it cost to boil a full kettle of water?
The cost to boil a full kettle of water depends on the energy efficiency of the kettle and the cost of electricity in your area. On average, it could cost around 2 to 10 cents to boil a full kettle of water.
Why does it a take a full kettle of water to boil longer than a half full kettle?
The more water in the kettle, the longer it will take to reach boiling point. This is why it is wasteful in energy to boil a full kettle if you only want to brew a small cup of tea.
How much energy is used to boil a kettle once?
Boiling a kettle once typically uses around 2000 to 2500 watts of energy for a few minutes, depending on the size and efficiency of the kettle. This can roughly translate to 0.04 to 0.06 kilowatt-hours (kWh) of electricity consumed per boil.
Vessels for boil tea?
To boil the water, most commonly used is a tea pot. Otherwise, you could use a small pot, and some people put a mug full of water into a microwave to boil, too.
How long do you boil raw chicken?
About 45 mins at a full boil. NEVER boil only gently simmer. 45 minutes about right
What can a water kettle be used for?
When using a kettle, it can be used for boiling water which has a number of uses. For instance use boiled hot water to cook pasta, make tea, speed up cooking time. A kettle can be used to clean utensils and kitchen equipment. And in those cold months a kettle can be used to melt ice from your car windscreen. There are a number of uses for your common kettle. Cleaning baby equipment and or making baby formula is another. But be carful with the kettle as it is full of steaming hot water.
When you boil chicken drumsticks and blood comes out is it safe to use the water for soup?
if you bring it to a full rolling boil it should be perfectly fine.
The tradition for putting sixpence in Christmas pudding?
boil the money in a saucepan full of water on the stove
How do you cook crawdads?
boil them for 10 minutes on a full boil.
Are camels humps full of water?
no they are full of fat which means that they can keep going for longer
What has more energy a bath full of water at 55 degrees celsius or a kettle full of water at 100 degrees celsius?
A normal bath full of water. Sorry but this depends on units of energy that you are familiar with-. I will use caldepending where you are taug The enery required to raise the temperature of the a 1kg of water in a kettle from zero degrees to 100 is 100 kilocalories The bath contains more at least 20 kg of water, and the energy required to raise the temperature of that volume of water by 55 degrees is 20 X 55 = 1100 kcals
