Shaking down the thermometer ensures that the Mercury or alcohol inside is at the bottom of the tube before use, providing an accurate starting point for temperature measurement. This helps prevent incorrect readings and ensures that the measurement is taken from the base of the liquid column.
To reset a Galileo thermometer, gently shake it or rotate it until all the glass bulbs are at the bottom. This will recalibrate the thermometer and allow it to accurately display the temperature.
To properly use a mercury thermometer, shake it down to below 96 degrees Fahrenheit, place it under your tongue for about 3 minutes, then read the temperature at eye level. Be sure to clean it with alcohol before and after each use.
To use a glass thermometer effectively for measuring temperature, first shake it down to below room temperature. Then place the thermometer in the substance being measured for a few minutes to allow the mercury to reach equilibrium with the temperature of the substance. Read the temperature at eye level and record the measurement. Be careful not to break the thermometer or expose it to extreme temperatures.
Before using a clinical thermometer, make sure it is clean and disinfected. Shake it down to below 35°C before using. Place it under the tongue for the recommended amount of time (usually about 3 minutes) without biting down to obtain an accurate reading.
Kink in a thermometer is important because it serves as a constriction point that prevents the mercury from sliding back down into the bulb once the temperature has been measured. This ensures that the temperature reading remains accurate.
Shake down the thermometer before using, if the reading on the thermometer is 94.0º F or above.
If the mercury won't shake back down, you ought to buy a new one.
To reset a Galileo thermometer, gently shake it or rotate it until all the glass bulbs are at the bottom. This will recalibrate the thermometer and allow it to accurately display the temperature.
To properly use a mercury thermometer, shake it down to below 96 degrees Fahrenheit, place it under your tongue for about 3 minutes, then read the temperature at eye level. Be sure to clean it with alcohol before and after each use.
Shake Down was created in 2006.
To use a glass thermometer effectively for measuring temperature, first shake it down to below room temperature. Then place the thermometer in the substance being measured for a few minutes to allow the mercury to reach equilibrium with the temperature of the substance. Read the temperature at eye level and record the measurement. Be careful not to break the thermometer or expose it to extreme temperatures.
Before using a clinical thermometer, make sure it is clean and disinfected. Shake it down to below 35°C before using. Place it under the tongue for the recommended amount of time (usually about 3 minutes) without biting down to obtain an accurate reading.
Shake Me Down was created on 2010-11-22.
Shake You Down was created on 1986-09-29.
It is important for the liquid in the thermometer to be uniform for accurate measurements. If a thermometer is not calibrated properly, it will detect measurements in temperatures that are inaccurate.
Shake 'Em on Down was created on 1937-09-02.
Pressha is the name of the group. Name of song is Shake It Down. -djcrak