Usually some energy is lost in some part of a process. Those losses can be reduced, but usually they can't be made to disappear alltogether.
Nothing can be more that 100% (one hundred percent)! When people say that something is one hundred and ten percent - they are wrong. It is an attempt to imply that something is greater that it should be. It is similar to the annoying habit of adding !!!! at the end of a sentence, when a single ! is correct.
When the efficiency of a simple machine is 85 percent, it means that 85 percent of the input work is converted into useful output work, while the remaining 15 percent is lost due to factors like friction and heat. This efficiency percentage gives an idea of how effectively the machine is performing its intended task.
Percent efficiency is a measure of how well a system or process converts input resources into output results. It is calculated by dividing the actual output by the theoretical maximum output, then multiplying by 100 to express it as a percentage. A higher percent efficiency indicates a more effective use of resources in achieving desired outcomes.
Electric induction motors typically have an efficiency of over 95 percent. These motors are commonly used in various applications such as industrial machinery, appliances, and electric vehicles due to their high efficiency in converting electrical energy into mechanical energy.
According to the Kalvin - Plank statement:-It is impossible to construct a device operating in a thermodynamic cycle. which produce no effect other than work output and exchange heat with a single reservoirand if it will be possible then it will called the PMM-2 (Perpetual motion machine of second kind).because if the engine exchange heat only with one thermal reservoir then the entire heat is converted into an equivelnt account of work and efficiency become 100%.
No. That would violate Conservation of Energy, so it follows that it isn't possible.
Not if the laws of physics - specifically thermodynamics - are correct.
Nothing can be more that 100% (one hundred percent)! When people say that something is one hundred and ten percent - they are wrong. It is an attempt to imply that something is greater that it should be. It is similar to the annoying habit of adding !!!! at the end of a sentence, when a single ! is correct.
Perhaps an electrical AC transformer can have 99 percent efficiency. A loudspeaker can have only 1 percent efficiency.
nothing has 100% efficiency.
nope, efficiency o fa machine cannot be greater than 100%...theoretically it shows sometime that efficiency of a machine can be 100%, but practically it cannot be possible as there is some loss of energy is always involved in different ways.
watches
The laws of thermodynamics imply that there will always be some loss of efficiency.
mechanical efficiency is the percent of the energy that you put into a machine that was transferred to the load.
It is not a good efficiency engine.
Efficiency is normally written as a percentage, and does not have an SI unit."percent". It has no units.
No. Nothing mechanical can ever have a 100% efficiency by any physical evaluation.