water does not have the quality of both alcohol and Mercury which can be easily measured
it cannot measure temperatures below 32 degrees F / 0 degrees C (the water would freeze). It also cannot measure temperatures above 212 degrees F / 100 degrees C (the water would boil).
Because of its properties. It freezes at 0 Celsius, and boils at 100 Celsius. WHen it freezes, it expands slightly - putting pressure on the vessel it's stored in. If it was used in thermometers... (a) you cold only measure a temperature range of between 5 and 95 degrees Celsius.
No, mass is not a thermometric property. Thermometric properties are characteristics that can be easily measured with a thermometer, such as temperature. Mass is a measure of the amount of matter in an object and is not related to temperature.
One thermometric property that is required is that it must vary linearly with temperature. In liquid-in-glass thermometers, the length of the liquid thread is often used to determine temperature. Thus when temperature increases, the liquid must expand uniformly with temperature, so that it can be used to measure temperature accurately.
The energy used to evaporate water is used to break intermolecular bonds between water molecules, allowing them to escape into the air as vapor. This energy is called latent heat of vaporization and is absorbed from the surrounding environment, cooling the remaining liquid water.
A manometer typically uses a liquid such as mercury or a colored oil to measure pressure. The specific type of liquid used depends on the requirements of the measurement and the accuracy needed. Water is not usually used in manometers as it has lower density and may not provide accurate readings.
Thermometric substances are materials that are sensitive to changes in temperature and can be used to measure it. Examples include mercury, alcohol, and liquid crystal.
what are the qualities of mercury over alchoholic as thermometric liquid
Thermometric liquid is a liquid used in thermometers to measure temperature changes. Common examples include mercury and colored alcohol, which expand or contract in response to temperature variations, allowing for precise readings. The choice of thermometric liquid depends on the temperature range and the desired accuracy of the thermometer. Mercury is often used for high-temperature measurements, while alcohol is favored for lower temperatures due to its lower freezing point.
Because of its properties. It freezes at 0 Celsius, and boils at 100 Celsius. WHen it freezes, it expands slightly - putting pressure on the vessel it's stored in. If it was used in thermometers... (a) you cold only measure a temperature range of between 5 and 95 degrees Celsius.
Mercury the liquid inside thermometer is mercury.. but it is called thermometric liquid.
Helium gas was used as a thermometric fluid"
Thermometric liquid is the liquid found in the thermometer that help in the up and down movement of the temperature.
These are materials used in thermometer whoses property varies with temperature
Mercury is considered an ideal thermometric liquid because it has a wide temperature range over which it remains a liquid, from -39°C to 356°C. It also has a high thermal conductivity, making it respond quickly to temperature changes. Additionally, it has a uniform coefficient of expansion, leading to consistent and accurate temperature measurements.
Some times red coloured liquid is used but mostly gray coloured liquid is used.
No, mass is not a thermometric property. Thermometric properties are characteristics that can be easily measured with a thermometer, such as temperature. Mass is a measure of the amount of matter in an object and is not related to temperature.
A thermometric scale is a system for measuring temperature. It is typically defined by two fixed points, such as the freezing and boiling points of water, with increments marked between them. Common examples include the Celsius and Fahrenheit scales.