answersLogoWhite

0

The cathode/anode are shaped the way they are to increase the concentration of electrons going in the proper direction. Basically focusing without losing too many.

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Physics

Why Cathode rays travel in straight lines?

Cathode rays travel in straight lines because they are composed of charged particles (electrons) that are negatively charged, and they are repelled by like charges. This repulsion causes the cathode rays to travel in straight paths from the cathode to the anode in a vacuum tube without deviating from their path.


How do the battery separate the negative energy and the positive energy?

Batteries separate negative and positive energy using chemical reactions that occur within the battery. The negative energy is stored in the anode (typically made of a metal like zinc) and the positive energy is stored in the cathode (often made of a material like manganese dioxide). When the battery discharges, electrons flow from the negative terminal (anode) to the positive terminal (cathode), creating an electrical current.


What is the definition of battery in science terms?

In science, a battery is a device that stores chemical energy and converts it into electrical energy through an electrochemical reaction. Batteries consist of one or more electrochemical cells, each of which contains two electrodes - an anode and a cathode - separated by an electrolyte. When a circuit is connected to the battery, electrons flow from the negative terminal (anode) to the positive terminal (cathode), generating an electric current.


How magnetic field is related with cathode rays in physics?

Cathode rays are negatively charged particles that move in curved paths in the presence of a magnetic field. The direction and curvature of the cathode rays can be controlled by adjusting the strength and orientation of the magnetic field. This phenomenon is known as the magnetic deflection of cathode rays and is used in devices like cathode ray tubes.


What supplies are needed for an electroplating science project?

A 12 d.c adopter,copper sulphate as electrolyte[20g][dissolve in 100 ml of water],cathode - a coin or spoon,anode -copper strip or copper bangle ,anode -connect to positively charged portion of adopter ,cathode - negatively charged portion's of d.c adopter, electrolytic cell.

Related Questions

What is the left leg of the led called?

Cathode and an anodeThey are called the "anode" and the "cathode", just like every other diode ever built.


What is state of matter forms when a fluorescent light bulb is turned on?

when a fluorescent light bulb is turned on, the state in it is still gaseous state. no change of state occurs by turning it on. It functions like a CRO(search cathode ray oscilloscope). one end acts as a cathode and the other as an anode. electron beam is produced by the cathode and it moves toward the anode. on thier way to anode, electrons collide with the walls of the glass. on the inside of the glass, it is coated with such a material that when electron collides with that surface, it produces a small flash of light. when millions of electrons do that, we see a bulb turned on.


What is the difference between anode led and cathode led?

A: A LED is a diode and like all diode they have an [anode] meaning positive terminal and a [cathode] negative terminal. Therefore the proper potential must be applied for it to behave like an LED.


What is the positive terminal of a diode known as?

It is called the positive + terminal or post, just like you list. Electrons flow for the negative - to the + terminal contrary to popular belief.Another AnswerAs electrons flow through the external circuit from anode (negative terminal) to the cathode (positive terminal) , then the answer is 'cathode'.


What are the cathode and anode in a fuel cell made from?

The cathode in a fuel cell is typically made from a material like platinum, which serves as a catalyst for the oxygen reduction reaction. The anode is usually made from a material like nickel, which helps facilitate the oxidation of the fuel.


How does a vacuum tube work?

contains only a heated electron-emitting cathode and an anode. Electrons can only flow in one direction through the device—from the cathode to the anode. Adding one or more control grids within the tube allows the current between the cathode and anode to be controlled by the voltage on the grids.[5]


What are the three terminals of a silicon bilateral switch?

Anode, Cathode and Gate. Like in a SCR


What is the cathode in an electrochemical cell?

The electrode at which a reduction reaction occurs.PhysicsA cathode is the element of an electron tube from which electrons flow. Back in the day, current was thought to be positive, but we understand things differently now. In the "old school" version, the cathode was the element into which positive charges flowed. But that's usually not what is taught for the simple reason that it's a classical physics approach and isn't at all as useful as the idea that the cathode is the element from which electrons leave to go to the plate.In a two-element tube, the cathode has a compliment called the anode, or plate. Electrons flow from the cathode to the anode. Not the other way. There are tubes with three, four, and more elements, but they have these two basic elements.ChemistryThe cathode is the electrode of a polarized electrical device, such as a galvanic cell, out of which positive electric current flows. In a battery like the one in a vehicle, the positive terminal is the cathode. The car battery, which is a lead-acid battery, also has an electrode that is the compliment to the cathode: the anode. It's the negative terminal of the battery, and positive electric current flows into this electrode.The Wikipedia article on the cathode covers both the chemistry application of the term as well as the physics application, and a link is provided.


How does the first tv work?

If you have read How Television Works or watched What If I Shot My TV?, then you have heard about electron guns. They sound a little bit like something out of "Star Wars," but they're actually the devices that are the heart of most TVs and computer monitors.The idea behind an electron gun is to create electrons and then accelerate them to a very high speed. In a cathode ray tube (CRT) -- the big glass tube used in most televisions and computer monitors -- the electrons get aimed at the screen, where they light up the phosphor on the screen to create the image.The electron gun from a CRT computer monitor is about the size of a roll of quarters. It contains the heater, cathode, focusing anode and accelerating anode for three electron beams.The electron gun starts with a small heater, which is a lot like the hot, bright filament of a regular light bulb. It heats a cathode, which emits a cloud of electrons. Two anodes turn the cloud into an electron beam:The accelerating anode attracts the electrons and accelerates them toward the screen.The focusing anode turns the stream of electrons into a very fine beam.When the electrons leave the accelerating anode, they are traveling at a reasonable fraction of the speed of light, and this gives them a lot of energy. When they hit the phosphor coating on the back of the front glass, the phosphor converts the electron beam's energy to photons and lights up.A black-and-white TV has a single electron gun, while a color TV needs three guns because each pixel on the screen is made of a red, a green and a blue dot.


Why Cathode rays travel in straight lines?

Cathode rays travel in straight lines because they are composed of charged particles (electrons) that are negatively charged, and they are repelled by like charges. This repulsion causes the cathode rays to travel in straight paths from the cathode to the anode in a vacuum tube without deviating from their path.


What makes currents move?

when there is two potential , due to potential difference ,electron from -ve side(cathode) flow towards +ve side(anode)(this is nature that electrons from cathod attract by anode) , so the electron moves in the path - ---> +, so current flow opp to that flow + ---> -in


Anod and katod region on corrosion protection?

In corrosion protection, the anode is the metal component that sacrifices itself by corroding to protect the cathode, which is the component that needs to be protected. By setting up a galvanic cell, the anode becomes the site of oxidation (corrosion) and helps prevent corrosion on the cathode. This sacrificial anode method is commonly used in protecting structures like ships and pipelines from corrosion.