0
What else can I help you with?
Describe what happens when you hold a compass close to a wire carrying a current?
When a compass is held close to a wire carrying a current, the magnetic field produced by the current will deflect the compass needle. This happens because a magnetic field is generated around the wire due to the flow of current, and the compass needle aligns itself with this magnetic field. The deflection of the compass needle can be used to determine the direction of the current in the wire.
How to hold a compass properly for accurate navigation?
To hold a compass properly for accurate navigation, hold it flat in your palm with the direction of travel arrow pointing away from you. Make sure the compass is level and steady, and rotate your body until the needle aligns with the north arrow. This will give you an accurate reading of your direction.
Why won't my compass work?
Your compass may not be working due to interference from nearby magnetic objects, a dead battery, or being too close to electronic devices. Make sure you are holding the compass level and away from metal objects when attempting to use it. If the issue persists, consider replacing the battery or seeking a new compass.
How do you hold a compass properly to ensure accurate navigation?
To hold a compass properly for accurate navigation, hold it flat in your hand, away from any metal objects or electronic devices that could interfere with the magnetic needle. Make sure the compass is level and steady, and rotate yourself until the needle aligns with the north arrow on the compass housing. This will give you an accurate reading of your direction.
What would a magnetic compass held the operator determine?
A magnetic compass held by an operator would help determine the direction of the magnetic North Pole. It works by aligning with the Earth's magnetic field, indicating the cardinal directions of north, south, east, and west. The operator can use this information to navigate and determine their heading or orientation.
Why Magnetic compass inoperative at the poles?
the fieldlines are pointing straight down. If your compass could rotate when held up (instead of lying flat on a table), the needle would point downwards.
Can you tow a 2007 jeep compass?
You can not flat tow a Compass with all four wheel on the ground.You can not flat tow a Compass with all four wheel on the ground.
How do you make a compass spin all the way around itself?
To make a compass spin all the way around itself, it would need to be held in place and left to freely rotate without any external interference. You can achieve this by placing it on a flat surface and ensuring that there are no magnetic or other interfering objects nearby.
Select the two methods for shooting an azimuth using a compass?
One method for shooting an azimuth using a compass is the "compass-to-cheek" method, where the compass is held level with the eyes and directly in front of the face to sight the target. Another method is the "center-hold" method, where the compass is held at waist level and aligned with the target while looking through the sighting window.
What technology made European exploration easier?
they had a globe that was flat and a map
Should you see a fence on the compass when your near the cattle ranch?
You should never see a fence on a compass.
What is a flat surface made up of points that extend indefinetly in all directions called?
a compass
How is GPS better than a compass?
A GPS uses satellites to show your exact position on a hand-held device. A compass point towards magnetic north, from which, using a map, you can take bearing of distant points to work out your position, or work out your direction of travel.Both are important tools to navigation - provided the GPS device's battery doesn't go flat!
How does a compess work?
the compass needle points north and just say it was pointing at the s for south it means the south is really north. the compass is held differently
How do you install trunk lock?
The latch is held on with bolts. The key cylinder should have a flat, spring metal U clip that slides around the cylinder to hold it tight in the hole. If you look at the edge of the trunk lid right below the lock you should see the flat end of the clip. It may be held in place with a pop rivet that much be drilled out.
Where is a ball bearing on a car?
In the compass held inside a plastic ball filled with liquid on the dashboard:)
How do you use an ordinary Compass?
To use an ordinary compass, hold it flat in your palm and make sure the needle can move freely. Rotate yourself and the compass until the needle points to the north direction marked on the compass. Now you can determine the other directions (east, west, south) based on the north reading.
