0
I'll assume you've tested to see if it's screwed on too tight *8-P
Hold the bottom base in place and unscrew the agitator. Nine times out of ten, something's caught in there gumming up the works.
If that's not it, put the washer on a 45 degree angle and look underneath. If you have the type with the belt drive, see if it'll move. if not, either it's wound too tight or the motor's got issues.
If yours doesn't have the belt, turn the washer on and see if the agitator motor is seized. If so, you're probably going to have to rebuild the motor (or have a professional do it.)
If the motor doesn't make the agitator spin, then you likely have a problem with your timer. They're pretty cheap, just replace it.
Hope that helps!
Additionally, there is a device that saves the washer from major damage, it is a two part couple; one part of couple is soft "rubber like" and the other is firm plastic. They join together and when stressed will shear. (It is used to protect the more expensive parts i.e. transmission and drive motor.) The couple is located above the transmission. usually it is a disc shaped item about 2-3 inches across and colored black or white. The part is very cheap and can be found at most appliance parts stores. Be careful when you dismantle the parts as some transmissions have an opening at the top and will leak a "nasty" lubricant if laid on its side. The most common cause for the failure is overloading the washer.
What else can I help you with?
What is the piece called in the middle of the washer machine?
The piece in the middle of a washer machine is called an agitator. It helps to move the clothes around in the water to clean them thoroughly.
Why does the agitator barely move in a washing machine?
A possible reason for the agitator barely moving in a washing machine could be a broken or malfunctioning agitator coupling. Another reason could be a problem with the drive belt that connects the motor to the transmission, causing the agitator to not move properly. It's best to have a professional technician diagnose and repair the issue.
Who invented the agitator that is used in the washing machines today?
The agitator used in modern washing machines was invented by Frederick Louis Maytag in the early 20th century. The agitator helps to move clothes around in the washing machine to ensure a thorough cleaning process.
Why do clothes get stuck under agitator?
Clothes can get stuck under an agitator in a washing machine if they are not evenly distributed around the drum. When the agitator starts to move, it can push some items down towards the bottom where they may become trapped. Ensuring a balanced load and not overfilling the machine can help prevent this issue.
How is a pulsator different from an agitator in a washing machine?
A pulsator creates water movement by rotating or pulsating to clean clothes gently, making it ideal for delicate fabrics. An agitator, in contrast, uses a central column to move clothes vigorously back and forth to remove dirt and stains from heavier fabrics.
What is the piece called in the middle of the washer machine?
The piece in the middle of a washer machine is called an agitator. It helps to move the clothes around in the water to clean them thoroughly.
Why does the agitator barely move in a washing machine?
A possible reason for the agitator barely moving in a washing machine could be a broken or malfunctioning agitator coupling. Another reason could be a problem with the drive belt that connects the motor to the transmission, causing the agitator to not move properly. It's best to have a professional technician diagnose and repair the issue.
Who invented the agitator that is used in the washing machines today?
The agitator used in modern washing machines was invented by Frederick Louis Maytag in the early 20th century. The agitator helps to move clothes around in the washing machine to ensure a thorough cleaning process.
Why do clothes get stuck under agitator?
Clothes can get stuck under an agitator in a washing machine if they are not evenly distributed around the drum. When the agitator starts to move, it can push some items down towards the bottom where they may become trapped. Ensuring a balanced load and not overfilling the machine can help prevent this issue.
How is a pulsator different from an agitator in a washing machine?
A pulsator creates water movement by rotating or pulsating to clean clothes gently, making it ideal for delicate fabrics. An agitator, in contrast, uses a central column to move clothes vigorously back and forth to remove dirt and stains from heavier fabrics.
What is a truss washer?
A truss washer is located on the crankshaft journal, It is to use to avoid the crankshaft to move forward or backward
Is it hard to move washer and dryer from bathroom to kitchen?
The washer is usually no problem, but you may run into problems with electrical supply and vent for dryer.
What happens to the velocity of the whirling washer when you shortened the string?
When you shorten the string while a washer is whirling, the velocity of the washer will increase. This is because the radius of the circle that the washer is moving in becomes smaller, which results in a shorter distance for the washer to travel in the same amount of time, increasing its velocity.
Is it hard to move washer and dryer from kitchen to bathroom in a condo unit?
Not at all
What will happen if a positively charged rod is near a metal washer?
Since a metal washer is neutral, the positive rod will make all the negatively charged electrons bunch up towards the front of the washer and nearer to the rod whereas the protons in the washer would repel from the rod and move to the back of the washer.
How do you locate the battery in the 1993 cutlass supreme?
Its under the washer fluid reservoir. Have fun with this one! You have to remove the support bar, the washer fluid reservoir, and move the air filter housing to get the battery out. Enjoy!AnswerIts under the washer fluid reservoir. Have fun with this one! You have to remove the support bar, the washer fluid reservoir, and move the air filter housing to get the battery out. Enjoy!
What will happen if a positively charged rod is brought near a metal washer.?
Since a metal washer is neutral, the positive rod will make all the negatively charged electrons bunch up towards the front of the washer and nearer to the rod whereas the protons in the washer would repel from the rod and move to the back of the washer.
