0
You can do this because it takes more pressure from the pipe to flow water to the upstairs tap than the amount of pressure it takes to flow water to the downstairs tap. This is clear in Bernoulli's Equation:
The fancy-looking p (pronounced rho) in the first two terms represents the
density of the liquid, v represents the velocity in which the fluid is traveling, g is the acceleration due to gravity (appx. 9.8m/s^2), and z is the difference in height traveled by the fluid, the final P represents the atmospheric pressure (101.3 kPa). As you can see, as the value of variable z decreases, it allows for the only other variable, v, to increase. This explains why, at a higher elevation and a constant force applied to the fluid, water will flow faster at a lower height than a higher point.
EDIT: It won't let me add an image for some odd reason, search Bernoulli's Principle and look for the phrase, "By multiplying with the fluid density", and reference the equation underneath for a more complete understanding of what I just said.
What else can I help you with?
Why filling a bucket from downstairs tap fills faster?
The larger the height difference between a point in a liquid and its surface (AKA the deeper it is), the more the pressure exerted at that point. To make it easy to visualize, imagine you are in a swimming pool. You get a feeling of being squeezed when you are under the water. The deeper you get (that is, the further you are from the surface), the stronger that squeeze is. That squeeze you feel is pressure. Whatever your setup is, whether you take the water from the city main pipeline or you have your own water tank or water pump, the idea is the same. The downstairs tap is "deeper" than the upstairs tap, i.e. it experiences more pressure. Since the larger pressure means a larger force, the water in the downstairs tap experiences a larger force, so more water can come out of that tap.
How many pints of water is needed to fill a 6 gallon bucket?
There are 8 pints in 1 gallon, so a 6-gallon bucket would require 48 pints of water to fill.
Volume of 5 gallon bucket?
5 gallons of liquid does indeed occupy a volume of 0.67 cubic feet (5 gallons divided by 7.48 gallons per cubic foot), but a "5-gallon" bucket actually holds a bit more than 5 gallons. Take your bucket and a 1-gallon jug, fill the bucket with water a gallon at a time, and mark the side of the bucket at each 1 gallon interval. You will discover that the 5 gallon mark ends up about 1.75 inches from the top of the bucket. Therefore a full bucket really holds somewhere in the neighborhood of 5.75 gallons (+/- a few ounces, depending on bucket manufacturer). This "extra" space in the bucket is there for practical reasons, as well as for safety--imagine the mess potential in opening a bucket of paint that is full to the very tip-top. So if you are filling your bucket to the top, you are really dealing with a volume of about 0.77 cubic feet.
How do you make a model on centripetal force using water bucktes?
To model centripetal force using water buckets, you can swing the buckets in a circular motion while attached to a rope. The force keeping the buckets in the circular path is the centripetal force, provided by the tension in the rope. You can add water to the buckets to observe how the centripetal force changes with the varying mass.
How many liters are in an average size bath tub?
9180000 because the average bathtub holds approximately 270 liters
Why filling a bucket from downstairs tap fills faster?
The larger the height difference between a point in a liquid and its surface (AKA the deeper it is), the more the pressure exerted at that point. To make it easy to visualize, imagine you are in a swimming pool. You get a feeling of being squeezed when you are under the water. The deeper you get (that is, the further you are from the surface), the stronger that squeeze is. That squeeze you feel is pressure. Whatever your setup is, whether you take the water from the city main pipeline or you have your own water tank or water pump, the idea is the same. The downstairs tap is "deeper" than the upstairs tap, i.e. it experiences more pressure. Since the larger pressure means a larger force, the water in the downstairs tap experiences a larger force, so more water can come out of that tap.
If you had a bucket with a diameter of 10 inches and a glass with a diameter of 1 inch and put both out in the rain which one would fill quicker?
The bucket with the larger diameter would fill quicker than the glass with the smaller diameter because it has a greater area to collect rainwater. The rain would accumulate in the bucket faster due to its larger surface area compared to the glass.
How do you get the snow to the yellow puffleson clock repairs?
You have to get the bucket from the guy with the chair and fill it] You have to get the bucket from the guy with the chair and fill it] You have to get the bucket from the guy with the chair and fill it]
How do you get 2 liters of water with a 7liters and 3liters bucket?
Fill the 7lt bucket and use this to fill the 3lt bucket leaving 4 lts in the 7lt bucket. Empty the 3lt bucket and then 1/3rd fill again This will leave 2lts in the 7lt bucket.
How do you fill the bucket with water on vampire curse island?
You use the water from the gaiser to fill up the bucket. :-)
Why would a 2 story house with 2 water heaters have hot and cold water in the downstairs bath but only hot in the kitchen and no water upstairs?
it sounds like there are crossed lines. if there is no water upstairs there has to be a valve that is off. even if there is low pressure it would eventually fill the line and you would get some water.
How do you fill up the empty bowl on 24 carrot island?
Take the bowl to the Diner on Main Street and the waitress will fill it with milk from her pitcher. Take it back to where you found it and then go upstairs by climbing the wire at right. Click the shower to get the cat out, then click the cat to chase her downstairs to the milk.
How do you move a full grown Oscar from the upstairs to downstairs safely?
This is not an easy job. Get a clean 5 gallon bucket. Not an old one, but a new one that has never been used. Clean it with WATER. No soaps, no detergents. Take enough water out of the tank to fill the bucket. Place the fish in the bucket. Drain the tank enough to make it light enough for two or three people to carry without dropping it. BE CAREFUL! Once the tank is downstairs, refill the tank. De-chlorinate the water. Add the proper amounts of aquarium salts and Stress Zyme. Try to get the tank refilled as close to the original temperature as possible. Place the Oscar back into the tank and leave it alone for several hours. It will shock a bit, but the fish should be back to normal in a day or two. Oscars are hearty and tough fish. Good luck!
How do you fill the bucket with water on moshi monsters?
You have to carry the bucket to the pond.
If I have a bucket of water that holds 4 gallons of water and another bucket that holds 7 gallons of water. The buckets have no markings. How can I go to the well and bring back exactly 5 gallons?
Fill the 4 gal bucket and empty it into the 7 gal bucket. Fill the 4 gal bucket and then fill the 7 gal bucket from the 4 gal. This leaves 1 Gallon in the 4 gallon bucket. Empty the 7 gallon bucket and pour the gallon from the 4 gal lbucket into it. Fill the 4 gal bucket and pour it into the 7 gal bucket. You then have 5 gallons in the 7 gallon bucket.
How do you precisely measure 6 liters of water if you only have one 7 liter and one 5 liter bucket?
# Fill the 5 liter bucket # Pour it into the 7 liter bucket # Fill the 5 liter bucket # Fill the 7 liter bucket from the 5 (2 liters go in leaving 3 liters in the 5 liter bucket) # Empty the 7 liter bucket # Pour the 3 liters from the 5 liter bucket into the 7 liter bucket # Fill the 5 liter bucket # Fill the 7 liter bucket from the 5 liter bucket (4 liters go in leaving 1 liter in the 5 liter bucket) # Empty the 7 liter bucket # Pour the 1 liter form the 5 liter bucket into the 7 liter bucket # fill the 5 liter bucket. You now have 5 liters in the 5 liter bucket and 1 liter in the 7 liter bucket; 6 liters in all. Pour the 5 liters into the 7 liter bucket if you want all 6 liters in one container.
How do you fill up a bucket in Minecraft?
To fill up a bucket in minecraft, there are two ways to do it, Go to a water source, aim with your cursor with the bucket in your hand and right click, this will cause the water to leave where it was and go into your bucket. Using the same technique as above, aim your bucket at a cow and right click and it will fill it up with milk.
