If your lawn mower doesn't have a drain plug, you can tilt it on its side to drain the oil. Make sure the oil is cool, remove the oil fill cap, and tilt the mower so the oil drains out through the oil fill hole. Be careful not to tilt it too much or oil may leak out of the air filter. Once the oil is drained, refill the mower with the appropriate amount of new oil.
believe it or not,I used a Turkey Baster to drain my tank to change a fuel filter.
On a push mower you take the oil cap off our drain plug out (which ever it has) and tip the mower on its side with the carburetor up. Once the oil is drained, refill it. Riding lawn mowers have an oil drain bolt on the bottom of the engine and you change the oil and filter kind of like a car
drain it
To drain oil from a lawn mower, first locate the oil drain plug underneath the mower. Place a container underneath to catch the oil. Remove the drain plug and let the oil drain completely. Once drained, replace the drain plug and refill the mower with fresh oil according to the manufacturer's recommendations.
The way to drain gasoline from a Briggs and Stratton lawn mower is to take the oil cap off and drain the oil. From there, run a rubber hose into the drain and siphon the rest of the oil and gas out.
The best way to change the oil on a Craftsman Eager One lawn mower - 6.75 HP is to buy a Toro.
There is no oil drain on a 650 series lawn mower. You have to turn the mower over and drain the oil from the spout you put it in the engine. Make sure the gas tank is empty
To properly drain lawn mower oil, first, warm up the engine by running it for a few minutes. Then, locate the oil drain plug underneath the mower and place a container underneath to catch the oil. Remove the drain plug and let the oil drain completely. Once drained, replace the drain plug and refill the mower with the recommended amount of new oil.
To properly drain oil from a lawn mower, first, make sure the engine is cool. Locate the oil drain plug underneath the mower and place a container underneath to catch the oil. Remove the drain plug and let the oil drain completely. Replace the drain plug securely and refill the mower with the recommended type and amount of oil.
To drain oil from a lawn mower without using a siphon, you can tilt the mower on its side and carefully pour the oil out through the oil fill tube or drain plug. Be sure to have a container ready to catch the oil and dispose of it properly.
remove fuel line and drain or run your mowe till it is out of gas.
On my Craftsman Lawn Mower, I have to raise the lawn mower or tilt it on it's side, and underneath where the blade is, there is a large drain plug. Take it off and catch the oil. This is a great time to clean the underside of your lawn mower and either sharpen or replace your blade.....Nothing cuts better than a sharp blade!