To replace the string on a Ryobi 40-volt trimmer, first, remove the spool cover and old string. Then, wind the new string onto the spool following the arrows for the correct direction. Finally, reassemble the trimmer and trim the excess string.
1-800-444-6742
no, from my experience, homelite, and ryobi are the same but not craftsman.
A few years ago HomeLite 18 volt tools would accept a Ryobi battery. They were identical.
Absolutely not! It is a 14 volt drill. Use a 16 or 18 volt battery will destroy the drill in short order. It will run but not for long.
considering Craftsman has nothing to do with HD which owns the company that makes Ryobi (TTI Inc.) why would they be the same? Maybe they'll fit, but highly doubtful.
No, the Black and Decker 18-volt cordless hedge trimmer NHT518 is not designed to operate on a 24-volt battery. Using a higher voltage battery than what the tool is designed for can damage the trimmer and may pose safety hazards. Stick to the recommended voltage for optimal performance and safety.
No, Ryobi and Homelite typically have different battery systems even though they are both 18 volts. They are not interchangeable between brands due to variations in design and compatibility. It is important to use the correct battery for your specific power tool brand.
NO! There are 50 bulbs in a 2.5 volt string or 125 volts. There are 35 bulbs in a 3.5 volt string or 122.5 volts. If you put 50 3.5 volt bulbs in you will have 175 volts and most american house have 110 volt service so you will have dim bulbs.
yes
No, a 240 volt string of Christmas lights is designed to be used with a 240 volt socket. Plugging it into a 110 volt socket may damage the lights and pose a safety hazard. Be sure to always use lights with the correct voltage rating.
You need to define what you mean by 2.0 and 1.6.
It is not recommended to replace a 14 volt battery with an 11 volt battery as the voltage difference may affect the performance of the device. It is important to use the correct voltage battery specified by the manufacturer to prevent damage to the device.