open the third & fourth link of this website: home-garden-resource.co.cc
hope you get answer; good luck !
The bulb has a pointed end and a flat end. Plant it twice the depth of the size of the bulb flat end down.
Generally tulip and daffodil bulbs should be planted at a depth that is about three times the diameter of the bulb. So, for example, if the bulb is 2 inches in diameter, it should be planted about 6 inches deep. Be sure to follow the specific planting instructions provided with the bulbs for the best results.
by planting it on bulb
by planting it on bulb
To use a drill bulb auger for planting bulbs in your garden, attach the auger to a drill, select the desired depth, and drill holes in the soil. Place the bulbs in the holes and cover them with soil. Water the area thoroughly and monitor the bulbs as they grow.
MOL refers to MAXIMUM OVERALL LENGTH. MOL is Maximum Overall Length measurement. MOL of bulb is measured from top of bulb to bottom of Bulb base (or bottom of pins.) Exception is if bulb has flexible wire leads, then measurement does NOT include the length of wires. Actual bulb is likely shorter (sometimes much, much shorter) than the MOL industry standard specification.
a light bulb is measured in watts
Normally planted in late Autumn ready from spring growth and picking in late may to September the bulb should be in about 50mm depth but have at least 100 mm of soil beneath it for root growth
The unit for intensity of light is candela(cd). However, bulbs are rated by their power usage which is measured in watts(W)
Light bulb are measured in Candela (Cd) for its luminous intensity and Watt for its power consumed.
the unit which are measured for power of lights are watts....
Brightness is measured in lumens so the bulb has a brightness of 100 lumens. The electrical power the bulb uses is measured in watts. The efficiency of a bulb is expressed in the number of lumens produced per watt of electric power.