0
What else can I help you with?
What is the purpose of a white wire with a black stripe in electrical wiring?
The purpose of a white wire with a black stripe in electrical wiring is to indicate that the wire is being used as a hot wire, carrying current to power a device or appliance.
Is Black wire vs black wire with white stripe positive or negative?
Any marking (a white stripe, bump molded into the cable, different wire colours) is an indication for your reference only. It doesn't matter, as long as you connect the marked side on the amplifier to the same polarity on the speaker side.
How do you wire the alternator on a 1968 Ford Mustang?
Hello. If your car has a charge indicator light, you should have a white wire with a black stripe hooked to the stator post, a white wire to the fld post, a black wire with a yellow stripe hooked to the bat post, and a black wire with a red stripe hooked to the ground post. The white wire on the fld post goes to the F terminal on the voltage regulator, the white wire with black stripe on the stator terminal goes over to the S post on the voltage regulator, the black wire with the yellow stripe on the bat post goes to the hot side of the starter solenoid, and the black wire on the grd post goes over to one of the attaching screws on the voltage regulator and also to the passenger side of the engine block, where it is attached with the same bolt that holds the negative battery cable to the block. If your car has the charge indicator gauge instead of the light, the stator post is not used.
Where do you attach the wire to add a tach to your 93 Chevy S10 Blazer 4.3 V6?
The ground wire of the coil. Its the white wire with a black stripe.
What is the brown wire and the blue wire with the white stripe for on a kenwood kdc mp205 car stereo?
brown wire is called earth wire .or blue wire with white stripe is for anteena wire ok
What is the car stereo wiring color code for a 1997 Honda Accord?
Right Rear Spkr (+) Red w/ Yellow Stripe Left Rear Spkr (+) Blue w/ Yellow Stripe Power Antenna Trigger Brown w/ White Stripe +12 Volt Ignition Wire Yellow w/ Red Stripe Right Rear Spkr (-) Brown w/ White Stripe Left Rear Spkr (-) Gray w/ White Stripe Ground Wire Black +12 Volt Battery Wire White w/ Yellow or Blu Stripe Left Front Spkr (+) Blue w/ Green Stripe Right Front Spkr (+) Red w/ Green Stripe Left Front Spkr (-) Gray w/ Black Stripe Right Front Spkr (-) Brown w/ Black Stripe
How many wires are connected to alternator on 1966 mustang which color goes where?
There should be three wires attached to back of the alternator of a 66. You should have a black wire with a red stripe hooked to the GRD post, a black wire with a yellow stripe hooked to the BAT post and a white wire hooked to the FLD post. The black wire with the red stripe is the ground and splits off with one end bolting to the engine block on the same bolt that holds the negative battery cable to the block, the black wire with the yellow stripe goes to the hot side of the starter solenoid, and the white wire goes over to the F post on the voltage regulator.
What are the two wires one orange with a green stripe and the other black with a white stripe on the bottom of the ignition coil on a 1998 Dodge Dakota Sport and which is negative?
The orange and green is the 12v feed from the auto shut down relay. The black and white wire is the wire the computer grounds.
What is the color code diagram for the radio for a 1996 Ford Ranger?
+12 Volt Ignition Wire Red +12 Volt Battery Wire Yellow Ground Wire Black Dash Light Dimmer Wire Orange (if available) Right Rear Spkr (-) Blue Purple w/ Black Right Rear Spkr (+) White w/ Blue Stripe Purple Right Front Spkr (-) White Gray w/ Black Right Front Spkr (+) Blue w/ White Stripe Gray Left Rear Spkr (-) Red w/ Blue Stripe Green w/ Black Left Rear Spkr (+) White w/ Blue Stripe Green Left Front Spkr (-) Blue w/ Orange Stripe White w/ Black Left Front Spkr (+) Purple White
How do you wire touch sensor I have black grey brown and yellow from sensor lamp has several white wires from post plus one black?
Connect the black wire from the touch sensor to the black wire from the lamp. Connect the grey wire from the touch sensor to the white wires from the post. Connect the brown wire from the touch sensor to the remaining white wire from the lamp. The yellow wire is typically a ground wire and should be connected to the ground wire in the electrical box. Make sure to follow the manufacturer's instructions for proper installation.
Should grooved wire be connected to white wire?
If you are referring to lamp cord type wire where both wires are brown then yes, connect the wire with the groves to the white neutral and the smooth wire to the black hot wire.
What are the wiring codes for the stereo in a 1998 Mercury Mountaineer?
Ford Wire Harnesses 1998-1999 And Newer Production Models Typical ford Factory Pin What It Is In Dash Wire Color Right Front Spkr (-) Green w/ Orange Stripe Right Front Spkr (+) Lite Tan w/ Green Stripe Right Rear Spkr (-) Orange w/ Maroon Stripe Right Rear Spkr (+) Black w/ Purple Stripe Dash Light Dimmer Wire Ford Amplifier Ground Wire Left Front Spkr (-) Lite Blue w/ White Stripe Left Front Spkr (+) Orange w/ Green Stripe Left Rear Spkr (-) Brown w/ Yellow Stripe Left Rear Spkr (+) Gray w/ Lite Blue Stripe Ground Wire Black w/ Green Stripe +12 Volt Ignition Wire Black w/ Pink Stripe +12 Volt Battery Wire Lite Green w/ Black Stripe
