The pin that holds the record in place is called the spindle. It helps to center and secure the record while it's playing on a turntable.
C-clips like on a u joint.
The end button is on the bottom of the instrument. It is used to hold the tailpiece in place.
"C" clips hold the axles in place. In order to remove the "C" clips the wheels and brakes need to be removed, then the rear diff cover, then the small lock pin/bolt that holds the spider pin in place, then the spider pin, then push the axles in until the "C" clip has clearance to be removed. Once the "C" clips are removed the axles will slide out.
A nibbling pin holds together a nibbling tool
"C" clips hold the axles in place. In order to remove the "C" clips the wheels and brakes need to be removed, then the rear diff cover, then the small lock pin/bolt that holds the spider pin in place, then the spider pin, then push the axles in until the "C" clip has clearance to be removed. Once the "C" clips are removed the axles will slide out.
A nibbling pin holds together a nibbling tool
Wherever you need to. If you're in a field environment, just don't take out the firing pin or extractor, for the sake of not wanting to lose that tiny extractor pin or the small cotter pin which holds the firing pin in place.
The record for the highest senior women average according to the USBC record sheet is 219 by Linda Wallace from Tucson, Ariz. She set this record in the 2007-08 season when she was 56 years old.
There is a button-like pin attached to the underside of the hand guard that holds the sling pin in place. Push it in and it will release the pin, allowing you to pull it out. To attach the Bipod, simply fit it into the recess at the very front of the hand guard and replace the sling pin. -Josh
Some play is normal but the pin that holds them in place should be snug in the housing.
The top of the pin is called the head of the pin.
It holds things closed.