RST on a ring likely stands for the initials of the metals used in the ring, which could be rose gold, sterling silver, and titanium. It is common for jewelry makers to mark their pieces with these initials to denote the materials used in the piece.
GSV typically stands for Gold Steel Vanadium, indicating the metal composition of the ring. It means that the ring is made of a combination of gold, steel, and vanadium, giving it strength and durability.
SR on a ring likely stands for "Sterling Silver," indicating that the ring is made from sterling silver. Sterling silver is a popular metal alloy consisting of 92.5% silver and 7.5% other metals, typically copper.
SRB 1 stamped on a ring likely indicates that the ring is made of sterling silver. The term "SRB" might also refer to the manufacturer or designer of the ring. It's a common practice for jewelry makers to stamp their pieces with such markings for authenticity and identification purposes.
The initials SR stands for slightly rusted. The factories can get sued for infections on the fingers so they put that as a warning on the ring.
SR on a ring typically stands for "Sterling Silver," indicating that the ring is made of genuine sterling silver. Sterling silver is a popular metal for jewelry due to its durability and classic appearance.
The 5.5 in RST 5.5 means that the interrupt vector is located between RST 5 and RST 6.
4 karrot gold
Could be 2.5 carat total weight diamonds.
http://www.trademarkia.com/esx-74196079.html
It means 14K PBD Peter Brams designs
If it is a vintage ring, it may be from the Traub company that made engagements rings circa 1925 and marked their rings with a TT.
"P4SR" marked on a ring could indicate that the ring is made of platinum (P), with a purity level of 950 parts per thousand (4/5). The "SR" could be a maker's mark or hallmark indicating the manufacturer or designer of the ring.
SECO was the trademark of Stein and Ellbogen, a jewelry wholesaler.
i have the same 18 marked 750 gold ring
A ring marked with "925" means it is sterling silver. The "A" may indicate additional components or characteristics of the ring, but it does not necessarily mean the diamonds are real. To determine if the diamonds are real, you would need to have them professionally evaluated by a jeweler.
Because that's how Intel designed the 8085. In addition to the 8080 type interrupt on the INTR pin, Intel chose, for the 8085, to implement four new interrupts, RST 5.5, RST 6.5, RST 7.5, and TRAP, each of which would not require the interrupting device to provide a vector. The naming convention of x.5 was simply in recognition that Intel placed the implicit vector halfway between two other RST vectors. As an example, RST 6.5 is halfway between RST 6 and RST 7. Since RST 6 and RST 5 are eight bytes away from each other, placing RST 6.5 in between would place a limit of four bytes, and four bytes is enough to place a three byte JMP instruction. The decimal and hex addresses of all of the vectors are... RST 0 - 0 - 00H RST 1 - 8 - 08H RST 2 - 16 - 10H RST 3 - 24 - 18H RST 4 - 32 - 20H TRAP - 36 - 24H RST 5 - 40 - 28H RST 5.5 - 44 - 2CH RST 6 - 48 - 30H RST 6.5 - 52 - 34H RST 7 - 56 - 38H RST 7.5 - 60 - 3CH
i have i ring with two different colours gold on it but it just marked mb is it gold