The easiest way to do this, is to tie into the drain below the lavatory piping as it connects to the vertical pipes in the wall.Cut in the tee for the washer below the tee for the lavatory.Run the 1 1/2" or 2" pipe horisontaly to the washer location,and add a p-trap of the same size.If the p-trap is inside the wall, you will need a solid or glued trap,and if outside the wall it is fine to use a union trap.From the trap, bring the stand pipe up to 40" off the floor,for the washer drain hose.The proper slope of the pipe from the tee fitting to the trap is 1/4" per foot up to the trap, and the maximum length of a 1 1/2" pipe is 6 feet.The maximum length of a 2" pipe is 8 feet.
There r diff parts in washing machine. First thing is the sensor used in it to made it automatic. Next comes the washing drum,where in cloths r washed. next is the inlet/outlet for the water flow......
Put your ear next to a blender or washing machine.
It is actually required in model codes as it preheats the water to the machine
Next to the washing machine. It's fallen into the black hole behind the microwave.
Well, to get to your condo you click the house button next to the map. But if you don't have a bear, you don't have a condo.
Ah, starting a whirlpool washing machine can be a delightful experience. First, locate the power button and turn the machine on. Next, select your desired wash cycle and water temperature. Finally, add your clothes and detergent, close the lid gently, and let the washing machine work its magic. Just remember to breathe and enjoy the process, my friend.
I'll ask him when I next see him
To properly install a washing machine drain hose, first ensure it is the correct length and diameter for your machine. Next, connect one end to the machine's drain outlet and the other end to a standpipe or laundry sink. Make sure the hose is secured in place to prevent leaks or kinks. Finally, test the machine to ensure proper drainage.
To remove a hose from a washing machine, first turn off the water supply and unplug the machine. Next, use pliers to loosen the hose clamp and slide it down the hose. Twist and pull the hose off the connection point. Be prepared for any water that may spill out when removing the hose.
Yes, people have accidentally washed their passports in the washing machine. When this happens, the passport may become damaged or unreadable. In such cases, the individual would need to apply for a new passport from their country's embassy or consulate.
To properly install a washing machine hookup in your laundry room, you will need to first locate the water supply lines and drain pipe. Then, connect the hot and cold water hoses to the corresponding water supply lines and secure them tightly. Next, connect the drain hose to the drain pipe and ensure it is properly secured. Finally, plug in the washing machine and test it to ensure there are no leaks.
No, rit red dye will not permanently stain the inside of your washing machine. However, when using red dye, I ALWAYS do a clear water wash afterwards to clear out any trace or granule of dye so that it does not affect my next load of laundry.