0
What else can I help you with?
What happens when you put a 1100mA into a 400mA plug?
You die
Can you use 500ma charger for 400ma device?
Yes, you can use a 500mA charger for a 400mA device. The device will only draw the amount of current it needs (400mA) from the charger, so there is no risk of overloading it. However, ensure that the voltage of the charger matches the device's requirements to avoid potential damage.
What does 400mA mean on a light?
400mA refers to the amount of current the light consumes when it is operating. It stands for 400 milliamperes, which is a unit of electrical current. Knowing the current consumption can help you select the appropriate power supply for the light.
Can you use a universal ac adaptor set at 9v 400mA for a portable radio set at 9v 800mA?
No. Your portable radio needs 800mA to operate. Your adapter can only produce 400mA. If you make the connection the adapter will rapidly heat up and probably burn out.
Can you use a 300ma power supply in place of a 400ma supply?
Yes, you can use a 300mA power supply in place of a 400mA supply, but it may not provide enough current for the device to operate properly. If the device requires 400mA and only receives 300mA, it may underperform, malfunction, or even be damaged due to insufficient power. It's important to ensure that the power supply meets or exceeds the current requirements of the device for safe and effective operation.
Can you use a 9V 600mA adapter on a 9V 400ma scanner?
You can use any 9v adapter as long as the output amperage is rated higher than the amperage rating of your appliance so yes a 600ma adapter can be used to power a 500ma or 400ma appliance
Can you use a DC 7.2V 400mA transformer to power a small motor?
First, there are no DC transformers, transformers work on AC. If you have an AC/DC wall converter that has an output of 7.2 v DC, and a max current load of 400mA, then you can use this to power a DC motor that requires less than (7.2 x .4 = ) 2.88 watts of energy.
Can I exchange a 12V 400MA transformer with a 12V 1.25 amp transformer without damaging the unit?
if used for charging-NO if used for supply voltage-yes
Which current range on the Fluke 8025A do you select to measure 250 milliamps alternating current?
To measure 250 milliamps alternating current on the Fluke 8025A, you would typically select the 400mA AC current range. This range allows you to measure currents up to 400mA, which covers your required measurement of 250 milliamps.
Which is bigger between .5 amp and .400mA?
.5 amps equals 500 ma, which is much larger than .400 ma.If you meant between .5 amps and 400 ma, then again, .5 amps equals 500 ma, which is larger than 400 ma by a factor of 100 ma.
How do you work out watts for solar power?
Answer You need the Voltage and the amps it can supply then use the magic triangle formula that is Watt = Amps X Volts say 400mA 12 volt that will work out to .4X12 = 4.8 watt
What will happen if use a 12v 400ma instead of 12v 500ma?
i am not sure, BUT according to the answer in this post:Can_you_use_a_9V_600mA_adapter_on_a_9V_400ma_scanneryou need an adaptor of 9v and AT LEAST 500mA (assuming that the appliance draws 500mA)
