The lumen output of a 150-watt incandescent bulb is typically around 2,600 lumens.
The lumen output of a 150 watt bulb can vary depending on the type of bulb. However, as a general guideline, a 150 watt incandescent bulb typically produces around 2600-2800 lumens.
10-11 lumens per watt for incandescent bulbs 13-14 lumens per watt for halogen 50-60 lumens per watt for fluorescent
Typically power leds operate as 1-2 watt units. 50 watt is a little excessive for a single led: it would have to be an array. The light output that can be achieved in normal use appears to range from 80-120 lumen/watt, so I guess the answer would be something like 4000-6000 lumen!
The output of bulbs varies. A typical output of a 60W incandescent bulb is 680 lumens.
Should be about 850 lumens. The same brightness is produced by a 15 watt CFL.
A 250 watt high pressure sodium bulb typically has a lumen output of around 28,000 to 30,000 lumens.
A 100-watt metal halide lamp typically produces around 8,000 to 10,000 lumens, depending on the specific design and efficiency of the bulb. This lumen output can vary based on factors such as the manufacturer and the lamp's age. Metal halide lamps are known for their bright, white light, making them popular for outdoor and commercial lighting applications.
A 32 watt T8 48 inch fluorescent bulb typically produces around 2800 lumens of light output.
The energy consumption of a modern Cree XP-G or XM-L based flashlight with 170 lumen output can be as low as 1.4 watts with 120 and more lumen per watt. The light output will be approximately equal to a 20 W tungsten incandescent light bulb or a 10 W halogen light.
A 35-watt MR16 lamp typically produces between 300 to 600 lumens, depending on the specific type and manufacturer. Halogen MR16 lamps tend to be on the higher end of the spectrum, while LED MR16 equivalents may vary based on efficiency. Always check the packaging or specifications for precise lumen output.
There's a range of products in each category and incandescent lumen output degrades more quickly than halogens due to typically short lamp life. Try this for a start. "14-17.5 lumens per watt for standard "A19" 120 volt 60 to 100 watt incandescents, and typically 16 to 21 for most halogen lamps." Conceivably, you could get 210 lumen output in a 10w halogen and as much as 1050 lumens out of a 60w incandescent. MR16's list beam power, rather than lumens because they are so focussed and directional.