0
What else can I help you with?
When replacing the AC compressor what is the oil capacity of the AC compressor for a 1995 Olds 88?
If the system didn't blow a hose and you are only replacing the compressor, I would add 3 ounces of oil to the new compressor through the suction port and turn the comp by hand several revolutions to pump it through.
When replacing a compressor in a home AC unit is it standard to replace the freon or is it possible to reuse the existing freon in the new compressor?
When you are replacing a compressor. Chances are that the compressor's internal motor had a burnout when this happens the there is a chemical reaction that makes everything very acidic this in-turn contaminates the refrigerant as well. The old refrigerant would be reclaimed and sent to a a reclamation center where it would be incinerated under the guidelines by the Dept of EPA .
Which is best central ac system carrier or Bryant or trane?
I would prefer Trane of the 3 you listed. But that`s just me.
How much compressor oil do i put in the compressor GMC pickup?
If you're only replacing the compressor and you did't blow a hose or something, 3-4 ounces should do it. It is recommended to replace the receiver/drier and orifice tube when replacing the compressor. In which case you would add 1-2 ounces more plus the 3-4 ounces for the compressor.
How can you safely remove a Trane XB12 5-ton compressor to install at another site and have a professional install it with a new furnace but have the compressor moved from a site 200 miles away?
Have one contractor recover the refrigerant, and seal the unit with soldered caps, and evacuate and recharge with dry nitrogen. Move it, then have the other contractor reinstall it, as he would a new unit. No problem!
How do you replace the serpentine belt on a 95 aurora?
i'am replacing a serpentine belt on a air condition compressor. i would like some diapham or step instructions would work the best thank you roger
How much oil in ac compressor 1995 S10 4.3?
The entire system takes about 8 oz. That is spread out thru all the components. If a hose didn't blow where you would lose alot of oil and you are just replacing the compressor, I would add 3 oz to the pump during installion. Add 4 to 5 ounces of oil into the a/c compressor and then prime it on the bench before you install it.........
Where can one read consumer reviews of Trane furnaces?
There are a number of websites on the internet that feature reviews of Trane furnaces. They are a well known company. The most popular one would be Consumer Reports.
What is the oil capacity of the AC compressor in a 1990 ford f150?
The whole system probably requires aprox 10 ounces. If your only replacing the compressor I would add 3 ounces into the suction port, then rotate pump clockwise by hand several times before engaging pump.
How do you know if your orifice tube is in need of replacing?
If the low side has too much pressure and the system isn't cooling properly that would be one sign that the orifice is plugged up. Removing the orifice tube and inspecting it would be the best way. If the orifice tube is loaded with metal trash, the compressor is probably on its way out. Replace the compressor, accumulator and orifice now before the compressor fills the system with trash, this you don't want to happen.
How much oil do you put in the ac compressor when replacing it?
Amount of compressor replacement oilFrom what I've read in other AC Manuals and what I've practiced, with regards to the amount of refrigerant oil to add, is to add the same amount that you drain from the old compressor unit that you removed from your system. This amount, from my experience is about 5 oz, however, it varies from compressor to compressor. The most accurate way to asses this, short of contacting the compressor mfg, is to apply what I said in the first sentence. add 6 ounces for a single ac system and 10 to 12 ounces for a vehicle w/rear air.(like surburbans, vans etc.)
What are the best cooling systems and how can I get them for cheap?
The best cooling system for your new home is a TRANE cooling system. The best bet as far as pricing goes I would look for a local Trane dealer. You can look in the yellow pages for that.
