0
A ton is a unit of weight equivalent to 2,000 pounds in the United States or 1,000 kilograms in most other countries. The number of steel pieces that make up a ton depends on the size and weight of each piece of steel. For example, if a steel piece weighs 10 pounds, it would take 200 pieces to make a ton. Conversely, if each piece weighs 50 pounds, only 40 pieces would be needed.
What else can I help you with?
How many 8mm steel bars in one ton?
The number of 8mm steel bars in one ton depends on the length of each bar and the density of steel. Generally, an 8mm steel bar weighs approximately 0.395 kg per meter. Therefore, in one ton (1,000 kg), you can fit about 2,531 meters of 8mm steel bars. If you assume each bar is 12 meters long, that would give you around 210 bars per ton.
How many steel bars of 10mm are in one ton?
The number of 10mm steel bars in one ton can vary based on the length of the bars. However, a typical 10mm steel bar weighs approximately 0.617 kg per meter. Therefore, in one ton (1000 kg), there would be about 1,620 meters of 10mm steel bars, which translates to around 162 bars if each bar is 10 meters long.
How many 16mm bars to a ton?
To determine how many 16mm bars make up a ton, you first need to know the weight of a single 16mm steel bar. A typical 16mm bar weighs approximately 1.58 kg per meter. Therefore, to find out how many bars are in a ton (1000 kg), you would divide 1000 kg by the weight of one bar. This results in roughly 632 meters of 16mm bars to make a ton, which corresponds to about 632 individual bars if each bar is 1 meter long.
How much is a ton of steel worth?
alot
How many kilograms of cocoa beans makes 1 ton?
One ton is equivalent to 1,000 kilograms. Therefore, it takes 1,000 kilograms of cocoa beans to make 1 ton.
How many tons of ore make a ton of steel?
1
How many steel pipes make a metric ton?
The number of steel pipes that make up a metric ton can vary depending on the size and thickness of the pipes. As a rough estimate, about 130-150 small or medium-sized steel pipes can make up a metric ton.
How many half inch steel make a ton?
The number of half-inch steel plates or bars that make a ton depends on the dimensions and density of the steel. Steel typically has a density of about 490 pounds per cubic foot. To calculate, you would need to determine the volume of a single half-inch steel piece and then divide the total weight (2,000 pounds for a ton) by the weight of that individual piece. For example, if each half-inch steel piece weighs 10 pounds, then 200 pieces would make a ton.
How many steel rods in a ton?
The number of steel rods in a ton will depend on the size and diameter of the rods. Typically, a ton of steel rods can range from around 540 to 650 rods, assuming they are standard size and weight.
How many lengths of 16mm rough steel in a ton and 10mm rough steel in a ton?
To determine how many lengths of steel can fit in a ton, you need to know the density of the steel and the specific weight of the steel per meter. Generally, rough steel weighs approximately 7850 kg/m³. For 16mm diameter rough steel, a typical weight is about 1.58 kg/m, allowing roughly 634 lengths in a ton. For 10mm diameter rough steel, it weighs about 0.62 kg/m, resulting in approximately 1,607 lengths in a ton.
How many square feet are in one ton of steel?
221
How many steel bars of 12mm are in one ton?
170 Y12 Bar to the ton at 6000 M long
How many Y10 steel rods are there in a ton?
269 6M lenths
What Are The Types Of Steel?
stainless steel ton steel carbon steel
How may tons of iron ore are required to make one ton of steel?
1.5
How many pieces in one ton of steel bar?
The number of pieces in one ton of steel bar varies depending on the size and weight of the individual bars. Standard sizes like 20mm or 25mm diameter bars can range from around 65 to 80 pieces per ton.
How many no of 6mm tore bar in one tone?
how many steel bar in one ton
