15 NB (Nominal Bore) typically refers to the diameter of a pipe. In terms of inches, 15 NB is approximately 0.590 inches. However, it's important to note that nominal bore sizes can vary slightly based on the specific standards and pipe types. Always check the relevant specifications for precise conversions.
How much sand is required to screed a floor 18 foot x 9 foot x2 inches thick?
To calculate the amount of sand needed, first convert the dimensions to feet: 2 inches equals 1/6 feet. The volume of the screed can be calculated as: 18 ft x 9 ft x (1/6 ft) = 27 cubic feet. Therefore, you would need 27 cubic feet of sand to screed a floor of those dimensions.
When is it necessary to use millimeters?
Millimeters are necessary when precision is critical, such as in engineering, manufacturing, and scientific measurements. They are commonly used in fields like medicine for imaging dimensions, in automotive and aerospace industries for component specifications, and in construction for detailed plans. Additionally, millimeters are often preferred in contexts where small measurements are involved, as they provide a clearer understanding of scale compared to centimeters or inches.
How many miles is 15888 steps?
The number of miles in 15,888 steps can vary depending on a person's stride length, but a common estimate is that there are about 2,000 steps in a mile. Using this estimate, 15,888 steps would be approximately 7.94 miles. However, for a more accurate conversion, knowing the individual's specific stride length would provide a better estimate.
Yes, the character Miles from the TV show "Moesha," played by actor Marcus T. Paulk, was written out of the series in its later seasons, and there were storylines that involved his character facing serious challenges. However, there has been no official statement about the character's death within the show's narrative. In real life, Marcus T. Paulk is alive.
Is 1 kilometer bigger than 999 meters?
Yes, 1 kilometer is bigger than 999 meters. One kilometer is equal to 1,000 meters, so it is greater than 999 meters by 1 meter.
No, a meter is not as big as a foot. A meter is approximately 3.28 feet, making it longer than a foot. Therefore, one meter is equivalent to about 39.37 inches, while a foot is 12 inches.
To convert centimeters to inches, you can use the conversion factor where 1 inch is approximately 2.54 cm. Thus, for 40 cm, you divide by 2.54 to get about 15.75 inches, and for 34 cm, you get about 13.39 inches. Therefore, 40X34 cm is approximately 15.75X13.39 inches.
What is the distance in miles from chorley to Cambridge?
The distance from Chorley to Cambridge is approximately 180 miles (290 kilometers) by road. The exact distance may vary depending on the specific route taken. If traveling by train, the distance might be slightly different depending on the train line used.
How many inches of weld on pipe?
The amount of weld on a pipe can vary significantly based on the application, pipe diameter, and welding process used. Typically, the weld length is determined by the joint design and the specifications of the project. For example, a full penetration butt weld may require a continuous weld along the joint, while a fillet weld may only need to cover a portion of the joint. Always refer to project specifications or standards for precise requirements.
How far from bexhill on sea to brigton in miles?
Bexhill-on-Sea is approximately 22 miles east of Brighton. The distance can vary slightly depending on the specific route taken, but it generally falls within that range. The journey typically takes around 30 to 40 minutes by car, depending on traffic.
To convert 0.5 miles to yards, you would use the ratio of 1 mile to 1760 yards. Therefore, you would multiply 0.5 by 1760 to find the equivalent distance in yards. The calculation would be: 0.5 miles × 1760 yards/mile = 880 yards.
What is the size of a bacteria in millimeters?
Bacteria typically range in size from about 0.2 to 10 micrometers (µm), which is equivalent to 0.0002 to 0.01 millimeters (mm). Most commonly, bacteria are around 1 µm in diameter. Due to their small size, they are usually not visible to the naked eye and require a microscope for observation.
1600 meters is equivalent to 1.6 kilometers or approximately 1 mile. This distance is commonly used in track and field events, particularly in middle-distance races. To put it in perspective, it's roughly the length of four laps around a standard 400-meter running track.
To convert kilometers to miles, you can use the conversion factor that 1 kilometer is approximately 0.621371 miles. Therefore, to convert 114 kilometers to miles, you multiply 114 by 0.621371, which equals about 70.837 miles.
How many floors on the stepmill equal 1 mile?
The number of floors on a stepmill that equals 1 mile can vary depending on the height of each step. However, a common estimate is that approximately 70 to 80 floors on a stepmill equate to 1 mile, assuming an average step height of around 8 to 10 inches. This estimation can differ based on individual stride length and step height settings.
How many inches is 4 100ths of a foot?
To convert 4 hundredths of a foot to inches, you multiply by 12 (since there are 12 inches in a foot). So, 0.04 feet × 12 inches/foot = 0.48 inches. Therefore, 4 hundredths of a foot is 0.48 inches.
A centimeter is a unit of length in the metric system, equivalent to one one-hundredth of a meter. It is commonly used to measure small distances or dimensions, such as the height of a person, the length of an object, or the width of a room. Tools like rulers and measuring tapes typically include centimeter markings for convenience in measurement.
What are examples of something a km long?
A kilometer is equivalent to 1,000 meters, which is about 0.62 miles. Examples of things that are approximately a kilometer long include a large city block, the length of a typical sports track (which is often 400 meters for one lap, so two and a half laps would be a kilometer), and the distance between two closely spaced landmarks, such as the length of a bridge or a small runway at an airport.
How many miles to yealand redmyne from ileliky?
To determine the distance from Yealand Redmayne to Ileyky, it would depend on the exact locations and route taken. However, Ileyky is not a widely recognized location, which may cause variations in distance based on interpretation. If you provide more context or correct the location, I could help further. For accurate distance, consider using a mapping service.
How tall is a stack of ten pennies in centimeters?
A stack of ten pennies is approximately 1.9 centimeters tall. Each penny has a thickness of about 1.9 millimeters, so when you stack ten of them, the total height would be around 19 millimeters, which converts to 1.9 centimeters.
90mm is equivalent to 9 centimeters or approximately 3.54 inches. This measurement is commonly used in various contexts, such as photography for lens diameters or in manufacturing for component sizes. To visualize it, it's about the width of a standard smartphone or a small paperback book.
A size of 60x80 inches is equivalent to 5 feet by 6.67 feet. This measurement typically represents a rectangular area, such as a large blanket or a piece of fabric. In terms of square footage, it covers approximately 33.33 square feet.
What should you compare 75 miles to?
You could compare 75 miles to the distance between major cities, such as the distance from San Francisco to San Jose, which is roughly 50 miles. Alternatively, it's about the same distance as a long road trip or a scenic bike ride, making it a manageable journey for a day trip. In terms of walking, it would take approximately 25 hours of continuous walking at a steady pace.
How many blocks is between two city bus stops?
The number of blocks between two city bus stops can vary widely depending on the city's layout. Typically, a city block can range from about 1/10th of a mile to several hundred feet. To determine the exact number of blocks, you would need to check the specific route and schedule for the bus service in question. Generally, urban areas have bus stops spaced every few blocks for accessibility.