Length and Distance

Yes, 88 inches is bigger than 7 and a half feet. Since 7 and a half feet equals 90 inches (7.5 feet × 12 inches/foot = 90 inches), 88 inches is actually less than 90 inches. Therefore, 88 inches is not bigger than 7 and a half feet.

One mile is approximately 1,609.34 meters. Therefore, 1,000 meters is about 0.621 miles, which is a little over half a mile. Specifically, 1,000 meters is roughly 62.1% of a mile.

5 feet 5 inches is equivalent to 65 inches. This is calculated by converting feet to inches (5 feet × 12 inches/foot = 60 inches) and then adding the additional 5 inches. Therefore, 5ft 5in = 60 + 5 = 65 inches.

A millimeter (mm) is a unit of length in the metric system, equal to one-thousandth of a meter. Specifically, there are 1,000 millimeters in a meter. Additionally, a millimeter is equivalent to 0.1 centimeters or approximately 0.03937 inches.

1 hm (hectometer) is equal to 0.1 kilometers. Therefore, 1 hm km can be interpreted as 1 hectometer multiplied by 1 kilometer, which equals 0.1 km. In simpler terms, 1 hm is a unit of length that represents one-tenth of a kilometer.

100 meters (m) is larger than 100 decimeters (dm). Since 1 meter is equal to 10 decimeters, 100 meters equals 1,000 decimeters. Therefore, 100 m is significantly larger than 100 dm.

To find the fraction of 1 km that 400 m represents, first convert 1 km to meters, which is 1000 m. Then, divide 400 m by 1000 m: ( \frac{400}{1000} = \frac{4}{10} = \frac{2}{5} ). Therefore, 400 m is ( \frac{2}{5} ) of 1 km.

To find out how long it takes for the man to get home, we first calculate the distance he has already traveled with the wind affecting his speed. At 6.76 km/h for 26 minutes (0.433 hours), he covers about 2.92 km, and at 5.55 km/h for 10 minutes (0.167 hours), he covers about 0.93 km. Together, these distances add up to approximately 3.85 km.

Subtracting this from the total distance to home (11.54 km), he has 7.69 km left to travel. At his normal speed of 9 km/h, it will take him about 51.3 minutes to reach home (7.69 km ÷ 9 km/h).

There are 120 fathoms in a league. A league is traditionally defined as three nautical miles, and since one nautical mile is equal to 60 fathoms, multiplying 60 by 3 gives you 180 fathoms in a league. However, in historical contexts, a league can also be defined as 3 miles on land, which would equal 150 fathoms. Thus, the specific conversion can depend on the definition used.

To convert millimeters to inches, you can use the conversion factor of 1 inch being equal to 25.4 mm. Therefore, to convert 118 mm to inches, you divide 118 by 25.4, which equals approximately 4.6457 inches. So, 118 mm is about 4.65 inches.

One meter is approximately equal to 39.37 inches. To convert meters to inches, you can multiply the number of meters by 39.37. Therefore, 1 meter is exactly 39.3701 inches.

To convert millimeters to inches, you can use the conversion factor of 1 mm = 0.03937 inches. Therefore, 4.75 mm is approximately 0.1866 inches when calculated (4.75 mm × 0.03937 inches/mm).

To convert yards to miles, you can use the conversion factor that 1 mile is equal to 1,760 yards. Therefore, to convert 21,120 yards to miles, you divide 21,120 by 1,760. This calculation results in 12 miles.

5.5 mm on a ruler is slightly more than half a centimeter, as 1 centimeter equals 10 millimeters. On a standard metric ruler, you can find 5.5 mm by locating the 5 mm mark and then measuring halfway between the 5 mm and 6 mm marks. It's important to use the millimeter side of a ruler for accurate measurement.

One mile is a unit of distance equal to 5,280 feet or approximately 1.61 kilometers. It's commonly used in the United States and the UK for measuring distances, such as in road signs or running events. For example, a standard track used for running is typically 1 mile when completed in four laps.

The price of a Lalique lemon dish measuring 4-5 inches can vary significantly based on factors such as its condition, rarity, and market demand. Generally, such pieces can range from $200 to $800 or more. To obtain an accurate valuation, it's advisable to consult recent sales, auction results, or a reputable antique dealer.

40 inches = 3.33 feet.

There are 670 linear meters in 670 meters, as the term "linear meters" refers to a straight measurement of length. Therefore, 670 meters is equivalent to 670 linear meters.

Yes, 6 feet is bigger than 1 metre 90 cm. Six feet is approximately 182.88 centimeters, while 1 metre 90 cm is exactly 190 centimeters. Therefore, 1 metre 90 cm is taller than 6 feet by about 7.12 centimeters.

The Nürburgring, specifically the Nordschleife section, varies in width but generally ranges from about 9 to 12 meters (30 to 39 feet) across. Some sections can be narrower, while others may be wider due to the layout of the track. The overall design accommodates various racing conditions and vehicle types.

1.95 meters is equivalent to 195 centimeters or approximately 6.40 feet. To convert meters to feet, you can multiply the meter value by 3.281. Therefore, 1.95 meters is roughly 6 feet and 4 inches.

Five miles is a unit of distance commonly used in the United States and other countries that use the imperial system. It is equivalent to approximately 8.05 kilometers. This distance can be measured in various contexts, such as running, driving, or walking routes. In practical terms, it's roughly the distance you might cover in a 1.5 to 2-hour leisurely walk or a short car trip.

One foot is equal to 12 inches. This conversion is based on the standard measurement system where 1 foot consists of 12 equal parts, each measuring 1 inch. Therefore, to convert feet to inches, you simply multiply the number of feet by 12.

To determine how many 8-inch lengths fit into 23 inches, you divide 23 by 8. This calculation gives you 2.875, meaning you can fit 2 full 8-inch lengths into 23 inches, with a remainder of 6 inches. Thus, 8 inches fits into 23 inches two times completely, with some leftover space.

A pen is typically not 12 inches long; most pens are around 5 to 6 inches for convenience and practicality in writing. However, if referring to a specific pen designed to be 12 inches long, it may be for novelty, promotional purposes, or to serve as a large display item. The length of a pen is determined by its intended use, comfort, and design considerations.