Temperature

The boiling point of water depends on any additional chemicals that might be in it, and on the atmospheric pressure. PURE water boils at 100 degrees Celsius at "standard" sea-level pressure of 29.92 inches of mercury.

Start by taking the number in Fahrenheit and subtracting 32. Then divide the number by 9, and then multiply it by 5. This is how you convert Fahrenheit to Celsius or use the equation C = (F - 32) × 5/9
In this case, the answer is about 1.11 degrees Celsius.

If a thermometer were placed in the thermosphere, it would register far below 0 degrees C! This may seem strange since the thermospher is so hot.(see answer to "what is one characteristic of each layer of the earth") How can this be explained? Temperatureis a measurement of how fast particles in the air move. The faster the air particles move the higher the temperature. And the particles present in the thermosphere are moving very fast. THerefore the particles themselves are very hot. But these particles are vry few and very far apart. There are not enough of them present to bombard a thermometer and warm it. So the thermometer would re3cord a temperature far below 0 degrees C.

STFW http://en.wikipedia.org/wiki/Temperature#Comparison_of_temperature_scales

37.8 degrees Celsius is equivalent to 100.04 degrees Fahrenheit.

Consider the boiling and freezing points of water at normal temperature and pressure (NTP). In the Fahrenheit scale water freezes at 32 deg and boils at 212 degrees. This is a difference of 180 degrees. In the Celsius scale, water freezes at 0 degrees and boils at 100 degrees. This is a difference of 100 degrees. Thus 100 degrees of Celsius is equivalent to 180 degrees of Fahrenheit. 100/180 is where the 5/9 comes from. However, there is an offset of 32 degrees in the Fahrenheit scale, so one has to subtract this first when doing the conversion. Hence the formula you already know. That help?

A hot bath temperature typically ranges between 100-104°F (37-40°C) for most people. It's important to be cautious and avoid water that is too hot, as temperatures exceeding 104°F can be unsafe and damaging to the skin. It's best to adjust the temperature to your comfort level and avoid prolonged exposure to very hot water.

The specific heat of benzene is 1.75 J/g°C. You can use the formula q = mcΔT, where q is the heat added, m is the mass of benzene, c is the specific heat, and ΔT is the change in temperature. Plug in the values and solve for c.

17 F is colder than 17 C (because 17 C = 62.6 F)

The Fahrenheit scale and Celsius scale are different one way by temperature limits.

1. On the Fahrenheit scale, water freezes at 32 degrees.

On the Celsius scale, water freezes at 0 degrees.

2. On Fahrenheit scale, comfortable room temp. is 70-80 degrees.

Celsius: 20-30 degrees.

3. Normal body temp: 98.6 degrees(fahrenheit)

37 degrees(celsius)

4.Highest recorded air temp: 136.5 degrees(fahrenheit)

58 degrees(celsius)

5. Water boils at 212 degrees(fahrenheit)

100 degrees(celcius)

:D

Both -40 degrees Fahrenheit and -40 degrees Celsius are the same temperature, as -40 is where the Fahrenheit and Celsius scales intersect. Therefore, they are equally cold.

* Begin by multiplying the Celsius temperature by 9. * Divide the answer by 5. * Now add 32. * 47 degrees Celsius=116.6 Fahrenheit

Assuming the depth of the layer is restricted to between 1000mb and 500mb, and increasing with time, it is almost certain that the surface temperature will remain constant, thus not increasing or descreasing.

Both define intervals between temperatures (degrees) and are defined at certain physical temperatures. However, despite having the same name, the "degrees" are of different sizes, and have different values at nearly every temperature on their scales.

Their differences

A Celsius degree is 1.8 times as large as a Fahrenheit degree, and sets its starting point at 0 for the freezing point of water. Fahrenheit's temperature is 32 degrees (F) for water's freezing point. The two scales only intersect at one point : -40 degrees Celsius is the same temperature as -40 degrees Fahrenheit.

Start by taking the number in Fahrenheit and subtracting 32. Then divide the number by 9, and then multiply it by 5. This is how you convert Fahrenheit to Celsius or use the equation C = (F - 32) × 5/9
In this case, the answer is about 7.222 degrees Celsius.

1000000 degrees Celsius is extremely hot, roughly equivalent to 1.8 million degrees Fahrenheit. At this temperature, most materials would instantly melt or vaporize, making it far beyond what is typically experienced on Earth.

The main mechanism that controls internal temperature in humans is the hypothalamus, a part of the brain that acts as the body's thermostat. It receives signals from temperature receptors in the skin and organs and adjusts processes like sweating or shivering to regulate body temperature around a set point. Additionally, other organs like the skin, blood vessels, and sweat glands play a role in thermoregulation through processes like vasoconstriction and vasodilation.

try tin foil cotton, aluminum foil, thermocol, and any other materials that keep water warm

By:Rohan

Nothing quite anything you might want to try a cup of water and cover it with a lid which will prevent your cup af water to stay warm for at least an hour.

By- Dr. Chemicals

To convert 9 degrees Celsius to Fahrenheit, you can use the formula (°C x 9/5) + 32. Plugging in 9 for °C, the calculation would be (9 x 9/5) + 32, which equals 48.2 degrees Fahrenheit.

1500 degrees Celsius is equal to 2732 degrees Fahrenheit.

To find the moles of N2, we need to use the ideal gas law equation: PV = nRT. First, convert 400.0 mL to liters (0.400 L). Then convert 780 mmHg to atm (0.998 atm), and 135 degrees Celsius to Kelvin (408 K). Plug these values into the equation to solve for n, which gives you the moles of N2 in the container.

No, a degree is not typically added when taking a temperature from the ear. The temperature reading from an ear thermometer is already in degrees Celsius or Fahrenheit, so there is no need to add a degree to the result.

Start by taking the number in Celsius and multiply it by 9. Then divide that number by 5, and then add 32. This is how you convert Celsius to Fahrenheit or use the equation F = (9/5)C + 32
In this case, the answer is about 27,000,032 degrees Fahrenheit.

To make 100 degrees Fahrenheit water, you can mix hot water from a faucet with cold water until you reach the desired temperature. Alternatively, you can use a thermometer to measure the temperature of the water and adjust accordingly.