0
What else can I help you with?
Why does 120 volt outlet read 145 volts on meter?
A reading of 145 volts is high. The first thing that I would check is the accuracy of your meter. Check the voltage reading at different locations for example, friends homes, to see if the reading is still high there. If it is check your meter reading against another meter. If you are sure that your meter and reading is correct then call the utility company and get them to check the voltage for you.
Can you get a false glucose reading?
Yes..Sometimes you have to check the meter and strips which may have an effect on the reading...I had a reading that was unusual for me...I checked it with another strip and the reading was more the range I was expecting
How do you check a camshaft sensor?
To check a cam sensor you can either use a scanner which plugs into the vehicle communication port or use a volt meter and check if the sensor produces a pulse like reading on the meter.
How do you provide a meter reading?
where do you go on your website to notify you of meter reading
How do you get meter reading?
You can get a meter reading by looking at the BIG circle thing that does be outside of the house and it will say 88888 and then say another number which is the meter reading.
How to read a meter accurately and efficiently?
To read a meter accurately and efficiently, first ensure you are familiar with the type of meter you are reading. Next, record the numbers from left to right, ignoring any numbers in red or after a decimal point. Finally, double-check your reading to avoid errors.
How do you know if a ceramic fuse is blown?
Put a continuity check on it. This can be done with an ohm meter. If there is no reading then the fuse is open.
How you can edit your car meter reading?
how can recet the meter
How do you check out an alternator to see if it is charging on a john deere 332?
Put a voltage meter on the battery, Note the reading, and start the engine, the reading now with it running should be higher. I would be happy seeing 13 to 14.5 volts on the meter with it running.
How do you check the electrical current flowing to my shop?
The best way to check any current flow is with a clamp on amp meter. If you know any electricians they will have one. The meter just clamps on around the service conductor and the meter will read out what the current in the conductor at that moment. The amperage reading is dependant on what is operating in the shop at the time. to find out the total current flow turn everything on and take a reading.
How to check the amperage of an electrical circuit?
To check the amperage of an electrical circuit, you can use a clamp meter. Simply clamp the meter around one of the wires in the circuit to measure the current flowing through it. Make sure to set the meter to the appropriate amperage range before taking the reading.
How can I accurately read a water meter to detect leaks?
To accurately read a water meter to detect leaks, first make sure all water sources are turned off. Record the initial reading, then wait a few hours without using water. Check the meter again - if the reading has increased, there may be a leak.
