0
I'm assuming that you mean "Add the contents of memory to an accumulator and place the sum back in the accumulator".
First, the address of the memory location needs to be placed on the address bus and the control lines to memory need to be driven in such a way as to tell the memory that a write operation has been requested (usually enabling OE and synchronizing with a clock).
Next (one or more clock cycles later depending on the type of memory being used), the data is returned from the memory. It must then be routed to the ALU.
The value in the accumulator must also be moved to the ALU and can be performed in either the first or second CPU cycle, depending on the internal architecture of the CPU. It is probably safest to do this in the first cycle.
Next the ALU must perform the addition instruction (third CPU cycle).
Finally, in the fourth cycle, the result can be moved from the ALU back to the accumulator.
What else can I help you with?
How do you draw a star diagram of food?
Draw about 4 lines making a star they should all go through the middle. Add 5 little lines on each 8 lines and add onto the end words like sweet, pretty ,crunchy etc.
How do you add new machine language instruction to a processor intsruction set?
To add a new machine language instruction to an processor instruction set, you need to replace the microcode of the processor.
How do you draw a spidergram?
A spider diagram is a simple way of organising your thoughts. You start by writing the main subject of the diagram in the centre of your page (light blue circle), now add the different subtitles around the edges (darker blue.)
What is the instruction to add the data in register B to the data in accumulator?
add B
How do you draw a kite diagrm?
To draw a kite diagram, start by sketching a vertical line to represent the main axis. Then, draw two pairs of adjacent sides that are equal in length, forming a diamond-like shape with the vertical line as the symmetry axis. Label the vertices accordingly, ensuring that the two pairs of sides are distinct and meet at the top and bottom of the shape. Finally, add any necessary labels or scales to complete the diagram.
How do you draw earth crust?
To draw the Earth's crust, you can create a simple diagram with a cross-section showing the layers—crust, mantle, outer core, and inner core. Label each layer, and consider using different colors to differentiate between them. You can also include key features like tectonic plates or mountain ranges to add detail to your drawing.
How do you draw a mammoth?
First draw an elephant, then add hair! To draw a mammoth draw an oval, then four squares coming out the bottom of the oval. Erase the lines that separate the square from the oval. Draw a circle on the top right side of the oval, for the head, then draw a squiggly line for the trunk. Draw some fur on top of the head. Draw the eyes (two circles) add some squiggles for fur. Smooth out the lines, and add shading.
Is add one byte instruction?
That would depend on the computer architecture.
How do you draw a fish?
Draw an oval that is longer than it is wide, then add triangle for fins and tail then close to where you draw the eyes and mouth, but not to close draw three curved lines for the gills
What the Difference between accumulator and instruction register?
Examples: /360: no accumulator 8080: A 6800: A and B 8086: AX ...
What is venn diagram sets in math group of add number what is yhe anwers?
make a venn diagram of set AB/C group of add number
How do you add a background to your teenspot profile?
go to : www.besteverprofile.com - gives you instruction on how to add a background and choose awesome layout.
