The starting and ending addresses of segment E000H is E0000H and EFFFFH.
The starting and ending addresses if the DS register contains 1A30H are 1A300H and 2A2FFH. The effective address range is 0H to FFFFH, and you simply add that to the segment register times 16 (left shifted 4).The 8086/8088 only operates in real mode. You don't have any other (protected) modes until you get to the 80286 and higher processors.
a line segment
The question is uncertain, but it is assumed that you are talking about a segment address of 2134H. In this case, the range of possible physical addresses is 21340H to 3133FH. If some other meaning is intended, please restate the question, with more specifics as to the meaning.
Yes, a flashlight beam can be considered an example of a line segment, as it is a finite portion of a line that has a starting and ending point.
it depends on the starting address and the ending address that you go to
A line segment in math is a straight line that connects two points. It has a starting point and an ending point, and it does not continue infinitely in both directions like a line does. A line segment is represented by a line with a starting point and an ending point marked with endpoints.
A line is never ending, a line segment is a line that starts somewhere and ends some where
A line is continuous with no ending whereas a line segment is defined as having end points.
A street would be considered to be a line segment. A ray has a beginning, but no known ending.
A circle has no starting or ending point of a circle. Hope this helps!
A parallel line segment are two lines with two ending points and are in a straight line that can never touch.
No it has two points otherwise it would just be a point you need two points to make a segment