0
The Cisco 2900 series routers do not support the installation of the WIC-1T (WAN Interface Card) and WIC-2T cards, as these are designed for older router models. Additionally, certain high-capacity or more advanced WIC cards, such as those designed for specific services or technologies not supported by the 2900 series, cannot be installed. Always refer to Cisco's official documentation for a detailed list of compatible interface cards for the 2900 series.
What else can I help you with?
Which slots are occupied by GSR processor cards on the Cisco 12016?
On the Cisco 12016 router, GSR (Gigabit Switch Router) processor cards are typically installed in the slots designated for the Route Processor (RP) modules. Specifically, these cards occupy slots 0 and 1, which are reserved for the primary and backup route processor modules. This configuration allows for redundancy and enhanced processing capabilities within the router.
Cisco router 7604 cisco router 7604 model?
Cisco 7604 router is members of Cisco 7600 series router,Cisco 7604 router is one of the smallest redundancy of the router,it can provide nx10GE Ethernet performance and rich services. As Cisco 7600 series of members, it for telecom operators edge, enterprise intracity networks (MAN) and wan application provides a powerful, high performance IP/MPLS function. And, four slots Cisco 7604 case to the compact 5 frame unit (RU) to provide outstanding performance appearance. It can be to use two kinds of configuration-single engine and three circuit CARDS, or the twin-engine and two line card. After a configuration help improve the reliability and redundancy. Cisco 7604 also support the redundant exchanges or dc power.
How many ports does a cisco 2800 router have?
2 Ports on the router however you can add more cards to the device. In a 2821 you can add 4 cards such as WICs and in a 2811 you can add 2 cards.
What is cisco dsus wic-idsu?
You probably mean the WIC-1DSU. WICs are WAN Interface Cards that can be used in among others the 2600 series router and 3600 series routers (with an NM-2W or equivalent). The 1DSU is a card used to connect to a T1 line.
What is mean modular and non modular router?
In modular router the interfaces are not fixed so that we will be able to installed cards latter on this router. But in case of non modular router the interfaces r fixed, we cannot able to add ports/interfaces latter on. That's all
Is cisco vic2-4fxo hot swappable?
No. You're supposed to power off the router before swapping vic2 cards. Hot swapping the card can cause damage to the router or card. I actually tried this once to see what would happen, luckily neither the router or card were damaged, but the card was not recognized until the router was rebooted.
What is a Cisco 2600?
The Cisco 2600 series routers are used to tie networks together, usually at the Access level.Each 2600 router has 1 or 2 Ethernet or Token Ring LAN interfaces, a Console and Aux port, and 2 WIC (WAN Interface Card) slots and an NM (Network Module) slot.WIC cards can be used to give the router 1 or 2 Serial WAN connections each, or things like ADSL interfaces, T1 cards, etc.NM modules can be used to give the router things like 2 extra WIC slots, 1 or 4 Ethernet ports, 4 slow serial WAN ports, 16 or 32 serial ports for controlling other routers, and many more.2600 series routers are also obsolete and no longer sold.
Are wireless G cards compatible with N router?
Usually they are, you have configure the router for G wireless networks.
A router with multiple slots that can hold different interface cards or other devices is called a?
Modular Router
What is the difference between simple router and isr router?
ISR router will do lot of services compared with normal router. For example terminating VPN Sections, VoIP support, and bridging LAN/WAN cards. Basically ISR routers are modular routers, you can insert WAN T1/E1, SONET, etc cards. - kumar
Can you use 80211n router for 802.11g adapter cards?
Yes, almost every n-router available supports b and g-modes too.
Is it possible that you may combine two networks with the help of device?
Yes. A router is commonly used for this purpose. A computer with two network cards can also be used (for fairly small networks).Yes. A router is commonly used for this purpose. A computer with two network cards can also be used (for fairly small networks).Yes. A router is commonly used for this purpose. A computer with two network cards can also be used (for fairly small networks).Yes. A router is commonly used for this purpose. A computer with two network cards can also be used (for fairly small networks).
