0
What else can I help you with?
Is a data bus unidirectional or bidirectional?
The control bus is a unidirectional bus because it can receive the data from any kind of inputs and send back the output. This whole process is done by the data buses.
Are relays unidirectional or bidirectional devices?
Relays are bidirectional devices.
Why is data bus bidirectional but address bus is unidirectional?
since data can be read /write from/to the microprocessor, hence data bus is bidirectional. if data is required read from microprocessor then it will be pointing to a memory location by the address bus, by indicating which location data its required to read. similarly to write a data to a location, again the microprocessor will be to that particular location by holding that address in address bus. hence it will be unidirectional.
Is alternating current unidirectional or bidirectional?
Bidirestional
Why is a diode called bidirectional?
Its not, a diode is unidirectional.
Is data flow bidirectional or unidirectional?
Data flow is always bidirectional my friend, don't confuse.
What are the two types of rf amplifiers?
A unidirectional amplifier & a Bidirectional amplifier
Why can't an address bus be bidirectional?
An address bus cannot be bidirectional because it is designed to carry signals from the central processing unit (CPU) to memory or I/O devices, specifying the address of the data to be accessed. Allowing bidirectional communication would complicate the bus design and synchronization, as it would require mechanisms to manage which device is sending and receiving data at any given time. This could lead to conflicts and increased complexity in circuit design, which is why the address bus is typically unidirectional.
Difference between unidirectional and bidirectional TVs diode?
Unidirectional TVS: A TVS device with asymmetrical current versus voltage (I−V) properties. A unidirectional TVS is best suited for protecting circuit nodes whose signals are unidirectional or always above or below the reference voltage, usually ground. Bidirectional TVS: A TVS device with symmetrical I−V properties. A bidirectional TVS is best suited for protecting electrical nodes whose signals are bidirectional or can have voltage levels both above and below the reference voltage, usually ground
What is the difference between unidirectional buffer and bidirectional buffer?
A bi-directional buffer includes first and second unidirectional buffers connected for retransmitting signals in opposite directions between first and second buses. When an external bus driver pulls the first bus low, the first unidirectional buffer pulls the second bus low and generates a signal inhibiting the second unidirectional buffer from actively driving the first bus. When the external bus driver allows the first bus to return to the high logic level, the first unidirectional buffer temporarily supplies a high charging current to the second bus to quickly pull it up. Similarly, when an external bus driver pulls the second bus low, the second unidirectional buffer pulls the first bus low and generates a signal inhibiting the first unidirectional buffer from actively driving the second bus. When the external bus driver allows the second bus to return to the high logic level, the second buffer temporarily supplies a high charging current to the first bus to quickly pull it up. The bi-directional buffer includes a register for storing and reading out data representing successive logic states of a signal on the first bus, thereby providing a history of data appearing on the bus
Why is data bus bidirectional but address bus unidirectional?
The address bus is unidirectional becos address information is always given by microprocessor to i/o devices. The data bus is bidirectional bcos it takes the data from other devices & also give the data to other i/o devices
Which bus is unidirectional and why?
The control and high order address buses are unidirectional.
