answersLogoWhite

0

Data Generating Capability of a Device is called Clock Rate.

If the clock rate is high, the processing will be slow down. If the clock rate is low, the processing will be high.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

When do you need to configure a clock rate on a router interface?

When it needs to provide clocking for the serial line. This occurs when you are using a null-modem cable in a lab. You would apply the clock rate to the router that is connected as the DCE device.


What does clock rate do on packet tracer?

A clock-rate is the speed at which the Serial connection sends data to another router and each connection must match the others clock-speed or a speed mismatch error will occur. For packet tracer, the clock-rate has no effect.


When must a router serial interface be configured with the clock rate command?

When the interface is functioning as a DCE device


What command is used to set data speed on a router's serial port to 56 kbps?

The command is: clock rate 56000 So it will appear on the command line interface as: Router(config-if)# clock rate 56000 Reference: Networking by Jeffrey Beasley Chapter 6 page 216.


Why set clock rate in router?

To configure the clock rate for the hardware connections on serial interfaces such as network interface modules (NIMs) and interface processors to an acceptable bit rate, use the clock rate interface configuration command. Use the no form of this command to remove the clock rate if you change the interface from a DCE to a DTE device. Using the no form of this command on a DCE interface sets the clock rate to the hardware-dependent default value.


What is the result of using the clock rate 56000 command at the serial interface of the router?

The interface is configured as a DCE device.


What is the relationship between clock cycle time and clock rate in a computer system?

The clock cycle time and clock rate in a computer system are inversely related. A shorter clock cycle time allows for a higher clock rate, which means the computer can process instructions faster. Conversely, a longer clock cycle time limits the maximum clock rate that can be achieved.


What is the relationship between clock rate and clock cycle time in a computer system?

The clock rate and clock cycle time in a computer system are inversely related. A higher clock rate means a shorter clock cycle time, allowing the system to process instructions faster. Conversely, a lower clock rate results in a longer clock cycle time, slowing down the processing speed of the system.


If a clock period is 10 microseconds what is the clock rate?

It is 100000 Hertz.


What does clock rate mean in computing?

Clock rate describes how many impulses per second mainboard quartz crystal generates. These impulses are used as the synchronization source by mainboard components. The clock rate is measured in Herz.


What is the clock rate of a laptop?

Laptops do not have a specific clock speed. The clock speed of the specific processor that is in the laptop determines the clock rate of the computer. For example, my computer runs at a clock speed of 2 GHz. Some computers even have clock speeds close to 4 GHz.


How to clock rate 6400 to cisco packet tracer?

in global configuration mode type this clock rate 64000 and hit enter