answersLogoWhite

0

What else can I help you with?

Related Questions

What is the position of the stack pointer after the pop instruction in Intel's 8085 and 8086?

In Intel's 8085 microprocessor, the stack pointer (SP) is decremented by 2 after a POP instruction, as it retrieves a 16-bit value from the stack. In the 8086 microprocessor, the stack pointer is decremented by 2 as well, due to the same reason of retrieving a 16-bit word from the stack. Thus, in both architectures, the stack pointer points to the next available address in the stack after the POP operation.


Why stack pointer is of 16 bit in 8085?

The stack pointer is 16 bits in size on the 8085 because that is how Intel designed it. The address bus is also 16 bits, so it made sense for the program and stack to be located anywhere in that address space.


Why are programme counter and stack pointer register 16 bit registers?

The program counter (PC) and stack pointer (SP) registers are 16-bit registers in the 8085 and in the 8086/8088 because that is how Intel designed the processors.


What happens when POP H instruction is executed in 8085?

The POP H instruction in the 8085 copies the top of stack to the HL register and then increments the stack pointer by 2. In C pseudo code, the sequence is L = *(SP++); H = *(SP++);


Which are the various 16-bit registers in Intel 8085?

The various 16-bit registers on the 8085 are BC, DE, HL, SP, PC.


What is stack in 8085 microprocessor?

STACK operation in 8085 microprocessor.The stack is a reserved area of the memory in RAM where temporary information may be stored. An 8-bit stack pointer is used to hold the address of the most recent stack entry. This location which has the most recent entry is called as the top of the stack.When the information is written on the stack, the operation is called PUSH. When the information is read from the stack, the operation is called POP. The stack works on the principle of Last in First Out or Fist in Lat Out


Why stack pointer is 16- bit register?

Program Counter( PC)stores the 16-bit memory address of the next instruction to be fetched. Stack Pointer (SP)stores the address of a memory location which is used as a stack.


What is stack operation in 8085 microprocessor?

STACK operation in 8085 microprocessor.The stack is a reserved area of the memory in RAM where temporary information may be stored. An 8-bit stack pointer is used to hold the address of the most recent stack entry. This location which has the most recent entry is called as the top of the stack.When the information is written on the stack, the operation is called PUSH. When the information is read from the stack, the operation is called POP. The stack works on the principle of Last in First Out or Fist in Lat Out


Why PC and Sp are 16 bit counter in 8085 microproceser?

Because Intel designed it that way. The 8085 was designed as a 8 bit computer in a 16 bit address space. This means that the PC (Program Counter) and SP (Stack Pointer) should be 16 bits in size.


Why stack is decremented by 2 in push instruction in 8085?

In the 8085 microprocessor, the stack is decremented by 2 during a push instruction because each push operation stores 16-bit data (2 bytes) onto the stack. The stack grows downwards in memory, so to accommodate the new data, the stack pointer (SP) is first decremented by 2 before the data is written to the memory location pointed to by the SP. This ensures that both bytes of the data are stored correctly in consecutive memory locations.


What is XTHL in microprocessor 8085?

XTHL == eXchange Top of stack with HL


Why call instructions in 8085 takes 18 state during fetch and execute?

4 states for opcode fetch and decode 3 states for each byte to retrieve the target (call) address 3 states for each byte of PC to push on the stack 1 state for each decrement of the stack pointer