The maximum memory capacity of the 8086 microprocessor is 1 megabyte (MB). This limitation arises from its 20-bit address bus, which allows it to address up to 2^20 memory locations, equating to 1,048,576 bytes or 1 MB. The memory is organized into segments, with the segmentation scheme allowing for more efficient memory management within this address space.
85 is a 8 bit processor,number of flags are 5 and memory capacity is 64KB while 86 is a 16 bit processor ,number of flags are 9 and memory capacity is 1 MB.The main difference between 8085 and 8086 is that 8086 uses pipelining.
The 8086/8088 can address a maximum of 220, or 1,048,576, or 1 MB of memory.
Memory to memory access is certainly possible in the 8086/8088 microprocessor. Look at the repeated string copy instructions.
Any SD memory card with a capacity of max 4GB.
8086 is a 16 bit processor and 80186,80286,80386,80486.Pentium etc are advanced microprocessors with certain additional features like virtual memory,memory management,protection features etc.Also their operating speed,memory capacity etc varies.They will operate in real mode where its like 8086 and virtual mode in which protection features are enabled
The highest memory address in the 8086/8088 is FFFFFH.
Its MRDC (memory read control) it is a maximum mode pin in 8086 microprocessor
The 8086/8088 is a 16 bit computer running on a 20 bit address bus. Processes use a segmented memory architecture to access one of four 64kb memory segments from a physical space of 1mb.
Because the 8086 is a 16 bit processor. Memory is organized as 512 MW of memory, or 1024 MB of memory.
8086 does not have RAM or ROM inside it. However, it has internal registers for storing intermediate and final results.
The 8086/8088 has 20 address lines. It can access 220, or 1MB, or 1,048,576 bytes of memory.
The 8086/8088 has 20 address lines. It can access 220, or 1MB, or 1,048,576 bytes of memory.