0
What else can I help you with?
What are the two prerequisites to enable AutoQoS VoIP?
Cisco Express Forwarding and bandwidth of the interface
What type of microphone will require an audio interface in order to operate correctly?
A condenser microphone will require an audio interface to operate correctly.
Which type of microphone will require an audio interface in order to operate correctly?
A condenser microphone will require an audio interface to operate correctly.
What command is used for forwarding without going through the listening and learning states?
Port Fast is used to bring an interface used as an access or trunk port to a forwarding state from a blocked state.
What is a menu based interface known as icons on the desktop environment?
There is a name for this scheme: graphical user interface.
What is adaptive interface?
it is somthing that animals can adapt to in there environment
What are the 2 type of connections to a router interface?
1. Determining the best path to send packets. 2. Forwarding packets toward their destination.
The PC the routing table of which is displayed is configured correctly To which network device or interface does the IP address 192.168.1.254 belong?
router interface fa0/0
What is packet forwarding?
Packet forwarding in simple terms is the forwarding of packets from one node to another from networking point of view. For example, a router or a switch. These networking devices make routing devices with the help of their routing tables and then select an outgoing interface. After that they make some changes in the packet header and push (forward) the packet to the selected interface. In case you don't know the meaning of packet. Packer is the smallest unit of size in networking. Different networks has different packet size. For example, in ATM Networks the packet size is of 53 Bytes.
How can I connect electronic drums to an audio interface?
To connect electronic drums to an audio interface, you will need to use audio cables to connect the output of the electronic drums to the input of the audio interface. Make sure to set the input levels on the audio interface correctly to avoid distortion or low volume.
What is the command used to configue a static route for a router?
ip route {destination prefix} {destination prefix mask} {interface OR forwarding router's IP address}
Which of the following commands will display the current IP addressing and the layer 1 and 2 status of an interface?
Below Cisco commands will display the current IP addressing and the layer 1 and 2 status of an interface:Router#showprotocolsRouter#show controllersThanks,Vahid
