answersLogoWhite

0

The READY signal of the 8085 microprocessor is sampled approximately one half clock after the trailing edge of ALE and, if not asserted, repeatedly one full clock cycle later until it is asserted.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What is included in a cell phone to handle the compression of data for it to be transmitted to another phone?

digital signal processor


What is the difference between voltage series and current series amplifier?

The main Difference between Voltage and Current Feedback Amplifiers is in the sampled(Output) signals. In Voltage feedback the sampled signal is voltage (Vf=Beta*Vo) where Vo is the sampled signal and for current feedback it is current signal (Vf=Beta*Io).


Circuit diagram of sampling?

A circuit diagram of a sampling system typically consists of a signal source, a sampler (like a switch), a hold circuit (to retain the sampled value), and an analog-to-digital converter to convert the sampled signal into a digital format. The switch opens and closes based on a clock signal, allowing the signal to be sampled at discrete time intervals.


What is the instantaneous sampling?

Instantaneous sampling is one method used for sampling a continuous time signal into discrete time signal. This method is called as ideal or impulse sampling. In this method, we multiply a impulse function with the continuous time signal to be sampled. The output is instantaneously sampled signal.


How is it possible to represent a complex exponential signal with a frequency of 20Hz using a sampling frequency of 30Hz?

A 20Hz signal must be sampled at a minimum of 40Hz to have a chance of sampling both peaks and to get a reasonable representation it must be sampled at a minimum of 100Hz.For a sampling rate of 30Hz the Nyquist frequency is 15Hz and since 20Hz is above that it will generate the alias signal of 10Hz in the sampled data instead of the original signal of 20Hz. Therefore it is not possible to do what you ask.


What are the differences between sample and interpolation methods in signal processing?

In signal processing, sampling involves taking discrete points from a continuous signal, while interpolation is the process of estimating values between those sampled points to reconstruct the original signal. Sampling reduces the amount of data, while interpolation helps fill in the gaps between sampled points to recreate a continuous signal.


What new age song has woman humming it was sampled by a rapper as well?

I think you are thinking of Boudicea by Enya, sampled by the fugees in "ready or not" and by Mario Wynans in "I don't wanna know"


What is meant by aliasing?

Distortion of frequency introduced by inadequately sampling a signal, which results in ambiguity between signal and noise. An unaliased image is an undistorted image provided by a robust sampling. or In signal processing, computer graphics and related disciplines, aliasing refers to an effect that causes different continuous signals to become indistinguishable (or aliases of one another) when sampled. It also refers to the distortion or artifact that results when a signal is sampled and reconstructed as an alias of the original signal.


What does ISP stand for in photography?

The ISP is the image signal processor.


What is an input or output of a continuosly variable signal within a designated range?

The input or output of a continuously variable signal within a designated range is a sampled data or a feedback system. This accepts limited analog signal and encodes.


Why are analog waveforms sampled 8000 times every second?

The frequency range for a voice signal is 300 to 4000 HZ. The Nyquist theorem states a waveform should be sampled at 2 times its highest frequency. So 2 x 4000 is 8000 samples every second. This ensures an adequate representation of the signal.


How do you test a current transformer using a digital signal processor?

You don't.