Because that's what routers do.
Changing the username and password that a Cisco ISDN router uses to dial-up ... in the router configuration in encrypted format, so even if you canview the settings. By lutaaya sulaiman +256753302061; lutasula@yahoo.com
The factory default login and password on the Cisco 1721 router is Cisco. This is usually written in the manual of the router or somewhere in the packaging of the device.
its the router password
How do I find the security password for my wireless E-1000 cisco router??? How do i find the password for my liksys router???
router>enable router#configure terminal router(config)#line vty 0 4 router(config-line)#password cisco router(config-line)#login to configure router with telnet you must set up password or secret for privilieged mode.
When resetting a Cisco 1841 router, the default password recovery and administration key is "confreg 0x2142." This allows you to reset the router with a new configuration.
To retrieve or reset the password for a Cisco E2000 router, you can perform a factory reset by pressing and holding the reset button on the back of the device for about 10 seconds until the lights blink. After the reset, you can access the router's web interface using the default IP address (usually 192.168.1.1) and log in with the default credentials, typically 'admin' for both username and password. If you previously changed the password and cannot remember it, a factory reset is necessary. Always make sure to reconfigure your settings after the reset.
whenever you log into your cisco router....
Some recommended books about Cisco routers are: Cisco Router Configuration, Cisco Routers For The Desperate, Cisco Routers for IP Router, Cisco CCNA Routing and Switching.
The Cisco Wireless Network works by making all of the computers connect to the internet through the same router. Most Cisco routers have the wireless connect by using a password so others can not steal the bandwidth.
Well I have a Cisco router - wireless N for around $80 CDN. It includes a CD with the package, and on the CD it lets you create a password for your router if you want to. For other routers it should be similar. Hope this helps.
Cisco routers do not encrypt any passwords by default. If a user wants to encrypt passwords they must use the service password-encryption command in configuration mode.