You step on the plug in the drain? The plug is part of the trim ring and screws into the drain. It seals the drain to the bottom of the tub. You can remove it and replace the drain completely, but you can't take out the plug.
On most push/pull stoppers the knob part that you pull on unscrews from the stopper, and under that is a slot for a screwdriver tighten or remove the stopper. On stoppers with non-removable knobs, there is a screw (usually phillips) under the stopper which can be accessed with the stopper in the up position and unscrewed to remove the stopper.
To remove a push-pull drain stopper, you typically need to unscrew the top cap of the stopper and then lift it out of the drain. You may need to use a pair of pliers or a screwdriver to help loosen the stopper if it is stuck.
To remove the drain stopper from the sink, you can usually twist it counterclockwise to unscrew it, or lift it up and pull it out.
To remove a drain stopper from a tub, you can usually unscrew it counterclockwise or lift and pull it out. If it's a push-pull stopper, you may need to twist and lift it to release it from the drain. Make sure to clean the stopper and drain before reattaching it.
To remove the drain stopper from your kitchen sink, locate the knob or lever on the stopper and twist or lift it to release the stopper from the drain. You may need to unscrew the stopper if it is held in place by a screw. Once the stopper is loose, pull it out of the drain to remove it completely.
To remove a push drain stopper, you typically need to unscrew the top cap of the stopper and then pull the stopper out of the drain. You may need to use a pair of pliers or a screwdriver to help loosen the stopper if it is stuck.
To remove a bathroom sink stopper, you can typically unscrew the nut connecting it to the drain pipe underneath the sink. Once the nut is loosened, you can pull the stopper out of the drain.
To remove the drain stopper from the tub, you can usually twist it counterclockwise to unscrew it from the drain. If it's a push-pull stopper, you may need to lift it up and then turn it to release it from the drain.
To remove a pop-up drain stopper, you typically need to unscrew the top cap or lift and twist it counterclockwise to release it from the drain. Then, you can pull out the stopper assembly from the drain.
To remove a sink stopper, locate the pivot rod underneath the sink and unscrew the nut holding the pivot rod in place. Once the nut is removed, you can pull the pivot rod out, which will release the stopper. You can then lift the stopper out of the sink drain.
To remove the stopper from a tub, you can usually twist it counterclockwise to unscrew it. If it's a push-pull stopper, you may need to lift it up and then turn it to release it. If the stopper is stuck, you may need to use a pair of pliers to grip and turn it.
To remove a sink stopper with a pivot rod, you can start by locating the pivot rod under the sink. Unscrew the nut that holds the pivot rod in place and then pull the pivot rod out. This will allow you to remove the sink stopper from the drain.