0
What else can I help you with?
What is best used for cleaning copper when soldering?
Emery cloth and non acid type flux
The steps for soldering iron?
Make sure the soldering copper (tip) is clean and free of oxidation add some type of non acid flux and do not over heat
Where can you find copper colored solder?
Copper colored solder can be found at http://www.beadmeus.com/coppercolorsolder.aspx the flux is included in the soldering rod.
What is flux used for when soldering?
Flux is used to keep metals from oxidizing. Solder will not bond well with copper-oxides which are formed when copper is exposed to high temperatures (ie a soldering iron) the flux prevents the oxidation. If you were to solder without flux the solder joint would be weak and possibly completely nonconductive.
How do you avoid copper from rusting during soldering?
To prevent copper from rusting during soldering, ensure that the copper surfaces are clean and free of oxidation before soldering. This can be achieved by using a flux to remove any existing oxidation and protect the surface during heating. Additionally, using the right type of solder that is specifically designed for copper can help prevent rusting.
Can borax be used as a flux?
Yes, borax can be used as a flux when soldering metals like gold, silver, and copper. It helps to clean the metal surfaces, prevent oxidation, and promote the flow of solder. Borax mixed with water can create a paste that is applied to the metal joints before soldering.
What is the difference between flux and soldering paste?
Flux helps promote soldering. Soldering paste might contain flux and other items to help promote soldering. The paste helps hold the flux in place while beginning to solder.
What is the use of acid in soldering and brazing?
It is used to clean impurities away from the surface to be soldered or brazed. Many times it is included in the flux. The use of acid type of fluxes is actually detrimental to good plumbing , soldering practices because if the flux is not properly cleaned the joint will eat away from the corrosive action of the acid
What are the best techniques for copper soldering?
The best techniques for copper soldering include cleaning the surfaces to be joined, applying flux to promote solder flow, heating the joint evenly, and using the right amount of solder. It is important to practice proper safety measures and work in a well-ventilated area when soldering copper.
Why use flux when soldering copper tube?
To prevent oxidation and allow the alloy to flow into the fitting capillary action (attraction) and it is best to use a non acid flux and if one knows how to braze they can braze joints with a tensile strength of 87,000 PSI without the use of flux PROVIDING you use the correct rod as per AWS
Method of using expired liquid flux Soldering?
It is not recommended to use expired liquid flux for soldering as the effectiveness of the flux diminishes over time, which can lead to poor soldering results. It is best to use fresh flux to ensure proper soldering and avoid issues such as weak joints or oxidation. Expired flux may also contain harmful chemicals that could pose health risks during soldering.
What is the purpose of using soldering flux?
After cleaning copper pipe and fitting, applying flux helps ensure that solder will adhere to pipe and fitting when joint is heated to proper temperature.AnswerIt depends on what type of 'flux' you are talking about? For example, 'electric flux' and 'magnetic flux' exists naturally, and is not 'for' anything in particular, although it can be made use of.
