0
What else can I help you with?
Will vinegar hurt solder joints on copper pluming pipes?
No, it will not affect them
How can I effectively solder copper pipes?
To effectively solder copper pipes, follow these steps: Clean the pipes and fittings thoroughly with emery cloth or a wire brush. Apply flux to the cleaned surfaces to help the solder adhere. Heat the joint evenly with a propane torch until it is hot enough to melt the solder. Apply the solder to the joint, allowing it to flow into the connection. Let the joint cool and wipe away any excess solder.
What is soldering gun used for?
It melts solder. Solder was originally a mix of lead and tin that was used to join copper to copper (pipes and wiring) It is in the shape of a pistol, but does not shoot anything.
Can you connect PEX to copper pipes?
Yes, PEX can be connected to copper pipes using various fittings such as push-to-connect, crimp, or clamp fittings. These fittings allow for a secure and watertight connection between the two types of pipes.
Will natural gas eat away at solder on copper pipes?
Yes, natural gas can corrode solder on copper pipes over time. This is due to the sulfur compounds present in natural gas that can react with the copper and cause deterioration of the solder joint. It is essential to use approved materials and proper installation techniques when working with natural gas lines to prevent corrosion issues.
What epoxy stick is best for water drips on copper pipes?
It is called Brazing rods or lead free solder
How do solder copper pipes with water in them?
That cant be done because as long as there is water in them the temperature of the pipe wont go up enough to allow the solder to flow. you have to remove the water.
What is the plumbing term MEANS?
The term "sweating" in Plumbing refers to the process of joining and sealing copper pipes and fittings by heating the copper and applying solder after the pipes/joint fitting have been properly cleaned and flux applied.
What is the plumbing term Sweating mean?
The term "sweating" in plumbing refers to the process of joining and sealing copper pipes and fittings by heating the copper and applying solder after the pipes/joint fitting have been properly cleaned and flux applied.
What do the letters SWT stand for in plumbing lingo?
SWT: This stands for "sweat", which is another term for "solder" (typically used to join copper pipes).
What temperature does solder melt when brazing copper pipe?
Solder typically melts at around 370-450 degrees Fahrenheit when used to braze copper pipes. It is important to use a soldering iron or torch with precise temperature control to ensure the solder melts evenly without overheating the pipe.
How can I attach PEX tubing to copper pipes?
To attach PEX tubing to copper pipes, you can use a fitting called a PEX-to-copper adapter. This adapter allows you to connect the PEX tubing to the copper pipe securely using crimp or clamp fittings. Make sure to follow the manufacturer's instructions and use the appropriate tools for a proper and leak-free connection.
