0
What else can I help you with?
Can compression fittings be used on hard copper?
Yes, the compression fittings designed for copper work on both soft and hard copper pipes.
Should i use copper or compression fitting on rigid copper?
If you are joining rigid copper pipes together, it is recommended to use soldered copper fittings instead of compression fittings. Soldered fittings provide a more secure and leak-free connection compared to compression fittings, especially under high temperatures and pressure.
Flare-less compression joints for piping?
Yes they have compression joint fittings for copper.
Do you use pipe dope on compression ring fittings?
no
What is quest plumbing?
You may mean Qwest fittings. (yes, with a 'w' not a 'u') This is a range of plastic plumbing compression fittings to fit many different pipes. They have an 'O' ring and a gripper inside a large nut to tighten onto the pipe. -Very hot item when they came out 20 or so years ago, now a little old fashioned compared to Sharkbite and similar fittings.
What are the benefits of using compression fittings for copper pipe installations?
Compression fittings for copper pipe installations offer several benefits, including ease of installation without the need for soldering, the ability to make connections in tight spaces, and the option to disassemble and reassemble the fittings if needed. Additionally, compression fittings provide a reliable and leak-free connection, making them a popular choice for plumbing projects.
How do you install rolled copper plumbing?
Unroll it and use as you would normal hard copper. Compression fittings or soldered fittings.
Can you use compression fittings on natural gas pipes?
No. You can use flared fittings with a flaring tool and soft copper pipe.
What are the different types of water heater fittings available in the market?
The different types of water heater fittings available in the market include compression fittings, solder fittings, push-to-connect fittings, and threaded fittings. These fittings are used to connect pipes and components in water heater systems.
Can you use standard compression fittings or must you use flared fittings when you need to join two lengths of copper tubing for use with a kerosene fueled monitor heater?
I believe it has to be flared as compression is not approved
How do you tighten ORB fittings?
To tighten ORB (O-Ring Boss) fittings, first ensure the threads are clean and free of debris. Use a wrench to hold the fitting body while tightening the nut with another wrench, turning it clockwise until snug. Avoid over-tightening, as this can damage the O-ring or fittings. A torque wrench can be used to apply the manufacturer's recommended torque specifications for added precision.
How do you connect bathtub waste to PVC pipes?
If you have slip compression fittings (brass/PVC) on your bath tub over flow and drain then you need to have a adapter PVC glue to compression before the trap running vertical and you will also need a access to inspect the compression fittings by most codes. I use glued fittings on all my tub drain and overflows because its the best kind of connection and you don't need access to it.
